CARLO GAVAZZI Eunica B5X-TEMDIS Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Controlador de temperatura CARLO GAVAZZI Eunica B5X-TEMDIS. CARLO GAVAZZI Eunica B5X-TEMDIS 3 páginas.

Imprimir página

Eunica Temperature Controller

5X-TEMDIS

smart-house temperature controller with display

Developed to fit into wall socket from Elko, Gira and Jung

Shows current room temperature

Shows outdoor temperature

Turns on/off heating and cooling

Set wanted room/floor temperature

Energy Save through night setback temperature

Channel Programming using BGP-COD-BAT

Optional floor sensor

Delivered with pre-programmed address on I/O 2

Delivered with both white and black pushbutton covers

Non-activated inputs and backlight indicated by white light

White LED and white backlight can be de-activated by internal dip switches

Activated inputs indicated by blue light

Channel programming

No. of channels

Channel assignment

SUPPLY SPECIFICATIONS

Power supply

Consumption (typical)

Activated (guidelight OFF)

Activated (guidelight ON)

Not activated (guidelight OFF)

Not activated (guidelight ON)

TYPE SELECTION

Supply

By smart-house bus

GENERAL SPECIFICATIONS

By BGP-COD-BAT and special

cable: GAP-TPH-CAB. After

mounting, reprogramming can

be done by removing the slim

pushbutton cover and

connecting the cable to the

connector on the back of the

switch element.

2 needed + 3 Optional

I/O 1: Not programmed

I/O 2: Pre-programmed to

address B2

I/O 3: Not programmed

I/O 4: Not programmed

I/O 5: Not programmed

Supplied by smart-house

1.5 mA

2 mA

0.6 mA

1.1 mA

Ordering no.

B5X-TEMDIS

Delivered with both white and

black pushbutton covers.

Frame not included.

Floor sensor BSO-TEMDIG is not

included.

Specifications are subject to change without notice (01.06.2010) - A product of the CARLO GAVAZZI Group

Enclosure

Environment

Degree of protection

Pollution degree

Operating temperature

Storage temperature

Humidity (Non condensing)

Weight

Dimensions

Eunica (WxHxD)

Max. wire in terminals

INPUT SPECIFICATIONS

Sensor

Range

Precision

Floor sensor

Temperature range

Cable length

Cable consists of 4 wires:

Brown

White

Yellow

Green

See wiring diagram

The floor sensor is an active 4-wire sensor and will only work

together with the temperature controller unit.

Eunica 55 x 55 mechanics

IP 20

3 (IEC 60664)

0° to +50°C (32° to +122°F)

-20° to +70°C (-4° to +158°F)

20 - 80%

33 g

55 x 55 x 25 mm

Max. 2 x 0.75 mm2

1 integrated temperature sensor

0 - 50°C (32 - 122°F)

± 1°C

(not included)

0 - 50°C (32 - 122°F)

4 m

Connect to "+" on Temperature

controller

Connect to "c" on Temperature

controller

Connect to "d" on Temperature

controller

Connect to "T" on Temperature

controller