Bosch 2 Manual de instalação e utilização - Página 6

Imprimir página

Bosch 2 Manual de instalação e utilização

1. Putting into Operation

BTEXACT_bu_3609929A44_t.fm Seite 5 Montag, 5. September 2005 2:12 14

Intended Use

The Bosch screwing system BT-EXACT/BT-ANGLE-

EXACT and EXAConnecT is intended for screwing in

and unscrewing screws as well as for tightening and

loosening nuts in the given size and torque range. It

is not intended for documenting torques or angles of

rotation of a screw connection.

Country-specific Instructions

European Community

This tool may be used in all countries of the European

Community. In France, the use of Bluetooth

tolerated. Please inform yourself of the regulations of

the region of use.

North America

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful in-

terference when the equipment is operated in a com-

mercial environment. This equipment generates, us-

es, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference

in which case the user will be required to correct the

interference at his own expense.

3 609 929 A44 • (05.09) T

Noise/Vibration Information

Measured sound values determined in accordance

with EN ISO 15744.

Measured vibration values determined in accordance

with EN 28662 and EN ISO 8662.

Typically, the A-weighted sound pressure level of the

product is 70 dB(A).

Measuring inaccuracy K = 3 dB.

The noise level when working can exceed 85 dB(A).

Wear ear protection!

The hand-arm acceleration is typically below 2.5 m/s

Measuring inaccuracy K = 1.2 m/s

is only

Declaration of Conformity

We declare under our sole responsibility that this

product is in conformity with the following standards

or standardization documents:

EN 60745, EN 60950-1:2001.12 + A11:2004.04,

EN 50366:2003.05,

EN 55022:1998.09 + A1:2000.10 + A2:2003.01,

EN 61000-6-2:2001.10,

EN 300328 V1.5.1:2004.08 according to the provi-

sions of the directives 89/336/EEC, 99/05/EC,

98/37/EC, 73/23/EC.

operator of the tool must take appropriate measures

to eliminate this interference.

Dr. Egbert Schneider

Senior Vice President

Engineering

Robert Bosch GmbH, Power Tools Division

English–5

The operation of this tool can

cause radio interference in a

residential area. In this case, the

Dr. Eckerhard Strötgen

Head of Product

Certification