Electrolux 534070 Ficha de especificações - Página 2

Procurar online ou descarregar pdf Ficha de especificações para Máquina de lavar loiça Electrolux 534070. Electrolux 534070 4 páginas. Electrolux single tank conveyor dishwasher with built in hot water booster specification sheet

Imprimir página
Electric
Supply voltage: 534070
208 V/3p/60Hz
534071
208 V/3p/60Hz
534072
240 V/3p/60Hz
534073
240 V/3p/60Hz
Dishwasher has three selectable hot water booster configurations
according to inlet water supply temperature.
Dishwasher requires two separate electrical service connections.
Connection 1 for Hot Water Booster; Connection 2 for running of the
machine (wash pump, tank heat, conveyor drive motor, rinse booster
pump, electronic control). Refer to the information below for Amp
requirements.
Booster 40 °F rise Electrical Characteristics
Hot Water Booster Amp Load Connection 1:
208 V/3p/60Hz
240 V/3p/60Hz
Wash Pump, Tank heat Amp Load Connection 2:
208 V/3p/60Hz
240 V/3p/60Hz
Total Amp Load: 208 V/3p/60Hz
240 V/3p/60Hz
Booster 70 °F rise Electrical Characteristics
Hot Water Booster Amp Load Connection 1:
208 V/3p/60Hz
240 V/3p/60Hz
Wash Pump, Tank heat Amp Load Connection 2:
208 V/3p/60Hz
240 V/3p/60Hz
Total Amp Load: 208 V/3p/60Hz
240 V/3p/60Hz
Booster 100 °F rise Electrical Characteristics
Hot Water Booster Amp Load Connection 1:
208 V/3p/60Hz
240 V/3p/60Hz
Wash Pump, Tank heat Amp Load Connection 2:
208 V/3p/60Hz
240 V/3p/60Hz
Total Amp Load: 208 V/3p/60Hz
240 V/3p/60Hz
33.35A (12 kW)
28.9A (12 kW)
61.7A (21 kW)
55A (21 kW)
95A (33 kW)
83.9A (33 kW)
50A (18 kW)
43.3A (18 kW)
61.7A (21 kW)
55A (21 kW)
111.6A (39 kW)
98.3A (39 kW)
66.6A (24 kW)
57.7A (24 kW)
61.7A (21 kW)
55A (21 kW)
128.3A (45 kW)
112.7A (45 kW)
44" Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT44
Water
Inlet Water supply pressure:
Inlet Water supply temperature
(booster size can be set on
site during installation):
Inlet Water supply hardness:
Incoming water line size:
NOTE: Two Hot Water Inlets on machine can be fed by
one incoming Hot Water line.
Drain line size:
Water consumption: Gallons/hr: 79.25 gal/hr (300 liters)
Water consumption/rack:
Wash Temperature:
Wash tank size:
Wash pump power:
Wash pump water flow:
Rinse Temperature:
Rinse pump power:
Rinse pump water flow:
Hot water booster capacity:
Initial fill water requirements:
Exhaust Requirements
Unit supplied as standard with extended vent hoods
(can be removed during installation if not required).
Exhaust extraction not more than 177 CFM (300 m³/h)
Refer to installation diagram for minimum exhaust hood
installation height .
Key Information
Productivity racks per hour
(max speed):
Productivity racks per hour
(min speed):
Table to Table connection:
Number of Tanks:
Height with door open:
Charging hole size (width):
Charging hole size (height):
Net weight:
Shipping weight:
Shipping width:
Shipping depth:
Shipping height:
Shipping volume:
Noise level:
Unit predisposed to accept external detergent dispensers, detergent
probes and rinse aid dispensers.
Warewashing
22 – 102 psi (150 – 700 kPa)
140 °F (60 °C)
with booster set as 40 °F rise.
110 °F (44 °C)
with booster set as 70 °F rise.
80 °F (27 °C)
with booster set as 100 °F rise.
4-8 gpg (7-14 °fH) max
G 3/4"
G 1-1/2"
0.4 gal/rack (1.5 l/rack)
160 – 172 °F (71-78 °C)
26 gal (100 liters)
2 hp (1.5 kW)
118.9 gal/min (450 l/min)
180 – 194 °F (82-90 °C)
0.4 hp (0.32 kW)
1.32 gal/min (5 l/min)
6.2 gal (24 liters)
32.2 gal (124 liters)
200 racks / 3600 dishes
(average 18 dishes per rack)
130 racks / 2340 dishes
(average 18 dishes per rack)
44" (1118 mm)
1
83-7/16" (2119 mm)
20-7/8" (530 mm)
19-3/4" (501 mm)
1012 lb (459 kg)
1210 lb (549 kg)
74-7/16" (1890 mm)
40-15/16" (1040 mm)
81-1/8" (2060 mm)
143 cu.ft (4.05 m
3
)
<70 dBA