Anchor WB-EXT500 Manual do Proprietário - Página 17
Procurar online ou descarregar pdf Manual do Proprietário para Sistema de microfone Anchor WB-EXT500. Anchor WB-EXT500 19 páginas.
IMPORTANT SAFETY INSTRUCTIONS
General Warning or Caution
The Exclamation Symbol in the figure to the left appears in Warning and
Caution tables throughout this document. This symbol designates an
area where personal injury or damage to the equipment is possible.
Electric Shock
The Electrical Shock Symbol in the figure to the left appears throughout
this manual. This symbol indicates a hazard arising from dangerous
voltage. Any mishandling could result in irreparable damage to the
equipment and personal injury or death.
Protective Conductor Terminal
The Electrical Shock Symbol in the figure to the left appears throughout
this manual. This symbol indicates a hazard arising from dangerous
voltage. Any mishandling could result in irreparable damage to the
equipment and personal injury or death.
European Union CE Mark
The presence of the CE Mark on Anchor Audio equipment means that it
has been designed, tested, and certified as complying with all applicable
European Union (CE) regulations and recommendations.
Alternating Voltage Symbol
The alternating voltage symbol means that the unit can also be used with
AC (alternating current) that is in the form of electric power from a wall
socket.
Direct Current Symbol
Figure DC Voltage Symbol
This international symbol implies a direct voltage or current.
Fuses
The fuse symbol in the figure to the left identifies the fuse location on the
Anchor Audio product. (Not required if not user replaceable)
On Symbol
The On Symbol in the figure to the left represents a power switch position
on the Anchor Audio product. This symbol represents a Power On condition.
Off Symbol
O
The Off Symbol in the figure to the left represents a power switch position
on the Anchor Audio product. This symbol represents a Power Off condition.
Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product or on its packaging indicates that this product
must not be disposed of with regular waste. Instead, it is the user's
responsibility to dispose of waste equipment according to the local laws.
The separate collection and recycling of the waste equipment at the time
of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For
information about where the user can drop off the waste equipment for
recycling, please contact your local authority for recycling advice.
Inspection for Damage
Anchor Audio products are carefully packaged at the factory to minimize the
possibility of damage during shipping. Inspect the box for external signs of
damage or mishandling. Inspect the contents for damage. If there is visible
damage to the instrument upon receipt, inform the shipping company and
Anchor Audio immediately.
Inspection for Damage
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional hazards to you. Contact
Anchor Audio Technical Support for advice before attempting to
plug in and operate damaged equipment.
Anchor Audio Technical Support:
800.262.4671 x782
Electrical Requirements
Before attempting to power up the unit for the first time, the following
precautions must be followed:
WARNING
To avoid electric shock, connect the instrument to properly
earth-grounded, 3-prong receptacles only. Failure to
observe this precaution can result in severe injury.
Have a qualified electrician verify the wall socket that will be used is properly
polarized and properly grounded.
Warning: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture, apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as vases or cups, shall be
placed on the apparatus.
The apparatus should be connected to a main socket outlet with a protective
earthing connection. For Nordic markings refer to copy of marking label.
The plug in the power cord is the AC mains disconnected device and must
remain readily operable.
There should be a minimum distance around the apparatus for sufficient
ventilation. The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains, etc.; no naked
flame sources, such as lighted candles, should be placed on the apparatus.
Equipment may be located above or below this apparatus, but some equipment
(like large amplifiers) may cause an unacceptable amount of hum or may
generate too much heat and degrade the performance of this apparatus.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
16