Formax FD 8502AF Manual de manutenção - Página 7

Procurar online ou descarregar pdf Manual de manutenção para Triturador de papel Formax FD 8502AF. Formax FD 8502AF 19 páginas. Autofeed shredder
Também para Formax FD 8502AF: Manual do operador (2 páginas)

Imprimir página

Safety Devices & Other Features

Automatic Reverse Rotation

When too much paper is inserted, the cutter stops operating and automatically rotates in reverse to discharge the jammed

paper. An alarm sounds. Remove the jammed paper and reduce the size of the stack, then restart the operation.

Door Switch

If the door is open, the shredder will not operate.

Automatic Stop

When the waste bin is full of shredded paper, the "FULL" LED will light comes on and the cutter stops operation. Open the

door, remove the waste bin and empty paper scraps. Replace the waste bin, close the door and continue operation.

Automatic Power Shut-Off

• If the shredder operates continuously for more than 30 minutes, the power is automatically shut off.

• If the motor is overloaded, the "STOP" LED will flash until it cools down. When the flashing stops the shredder is ready

to be used again.

Oil Indicator

The "MANUAL" LED will flash after every four (4) hours of operation as an indicator to oil the shredder cutting blades. The

LED will continue to flash until oiled. NOTE: the shedder will still operate when the LED is flashing but at a decreased

load capacity.

To oil: Spread shredder oil onto the cutters through the feed opening, and allow the oil to sit for a few minutes to

permeate the cutting blades, then press the "REV" button and hold for five seconds. "MANUAL" and "REV" LED indicators

on control panel will light. The shredder will operate in reverse for one minute, then the "AUTO" LED will light indicating

the shredder is ready.

Safety Precautions

To avoid personal injury, and damage to the shredder, observe the following safety precautions. Please keep these

instructions for future reference.

NOTE: In case of emergency, flip the "Power Switch" to cut off power

and/or pull the plug out of the wall outlet.

• Keep hands, long hair, clothing, ties, jewelry and loose items away from the

feed opening and shred outlet.

• Do not use the shredder for anything other than its intended purpose. Never

use it to shred cloth, plastic, cardboard or any hard material that will cause

damage to the shredder blades.

• Do not allow children to use the machine.

• Do not operate with a damaged power cord or plug, or when the machine is

damaged in any manner.

• Unplug the shredder when it is being moved, or if it is not in use for an

extended period of time.

• Do not disconnect the power by pulling only the cord. Hold the plug when

disconnecting.

• Keep the shredder away from direct sunlight.

• Do not sit on the shredder or place anything on top of it.

• Never open the fixed switch or cover.