Formax CT-20 Manual de montagem, operação e peças - Página 6

Procurar online ou descarregar pdf Manual de montagem, operação e peças para Equipamento de escritório Formax CT-20. Formax CT-20 12 páginas. Conveyor stacker

Imprimir página

SETUP AND OPERATION

Connect the cord to the conveyor and plug it

into the wall outlet.

Set the height of the conveyor to match the

outfeed of the printer/feeder. Carefully loosen

the two knobs on either side of the conveyor

stand to raise or lower the stand height, a

second person may be required. The top of

the conveyor should sit below the exit of the

printer when rolled into position.

Turn the black power switch to the on position.

The blue runout button will light up when the

power is in the on position.

Setting the stacking shingle. Use the speed

control knob to adjust the tightness of the

shingle stack. Slower speeds will create a

tighter shingle, faster speeds will increase the

shingle spacing. Adjust the stacker wheels in

or out to accomodate the envelope comong

out of the printer. Closer for smaller media

and further out for larger media.

Press and hold the blue runout button to

neatly gather media off the conveyor.

Runout Button

Speed Control

Power

Shingle Distance

Stacker Wheels