Dream Vision Very BEST Manual de instalação - Página 7

Procurar online ou descarregar pdf Manual de instalação para Projetor Dream Vision Very BEST. Dream Vision Very BEST 16 páginas.

Adjusting the frame height

The position of the frame can be adjusted. To raise, lower or tilt the frame you must release the screw located on

the side of this unit using the supplied Allen wrench. Move the frame to the desired position before tightening the

screw.

3.3 Table Mounting

The Very BEST 3D Passive Kit should be placed on a flat and stable surface then fixed with 4 screws. It should

also be placed in front of the projector lens, the side with a "Projector Side" label printed on it facing the lens.

Make sure to place the projection device on the "Projector Side" label side.

The polarizer of the window should be approximately perpendicular to the axis of the luminous flux.

Adjust the frame tilt so it is perpendicular to the projector beam.

R699867 - Very BEST 3D Passive Kit User Manual

Adjusting the height and tilt of the polarizing frame.

PROJECTOR

SIDE

release the screw to

adjust the postion

INSTALLATION