AND UA-705 Manual de instruções - Página 13
Procurar online ou descarregar pdf Manual de instruções para Monitor de tensão arterial AND UA-705. AND UA-705 15 páginas.
Imprimir páginaProblem
Nothing appears in
the display, even
when the power is
turned on.
The unit does not
measure.
Readings are too
high or too low.
Other
Note: If the actions described above do not solve the problem, contact the dealer.
Do not attempt to open or repair this product, as any attempt to do so will
make your warranty invalid.
Do not open the device. It uses delicate electrical components and an intricate air
unit that could be damaged. If you cannot fix the problem using the troubleshooting
instructions, request service from your dealer or from the A&D service group. The
A&D service group will provide technical information, spare parts and units to
authorized dealers.
The device was designed and manufactured for a long service life. However it is
generally recommended to have the device inspected every 2 years, to ensure
proper functioning and accuracy. Please contact either your authorized dealer or
A&D for maintenance.
Troubleshooting
Possible Reason
Battery is drained.
Battery polarities are
not in the correct
position.
The cuff is not fastened
properly.
You moved your arm
or body during the
measurement.
The cuff position is not
correct.
The value is different
from that measured at
a clinic or doctor's
office.
Maintenance
English 12
Recommended Action
Replace all battery with a new one.
Reinstall the battery with its negative and
positive end matching those indicated in
the battery compartment.
Fasten the cuff correctly.
Make sure you remain very still and quiet
during the measurement.
Sit comfortably and still.
Ensure that the cuff is the same level as
the heart.
If you have a very weak or irregular heart
beat, the device may have difficulty in
determining your blood pressure.
See "Why measure blood pressure at
home?".
Remove the battery. Re-install it properly
and try the measurement again.