Dreame DreameBot L10 Prime Manual - Página 5

Procurar online ou descarregar pdf Manual para Aspirador de pó Dreame DreameBot L10 Prime. Dreame DreameBot L10 Prime 11 páginas. Robot vacuum and mop with automatic mop cleaning

Imprimir página

Product Overview

Base Station

Upper Cover

Used Water Tank

Clean Water Tank

Washboard

Water

Tank Clip

Float Ball

Used Water Tank

Clean Water Tank

Water Tank Clip

Water Pipe

Filter

Floater

Before Use

1. Remove the Protective Strips and Install the Accessories

Side Brush Clip

Status Indicator

· Solid white:

Protective Strip

The base station is connected

to power

· Blinking Orange:

The base station has an error

Signaling Area

Note: Install the side brush until it clicks into place.

2. Set up the Base Station

Charging Contacts

Place the base station in a location that is as open as possible with a good Wi-Fi

signal. Insert the power cord into the base station and plug it into the socket.

Firmly insert the power

cord upwards until the

indicator turns on.

Note:

Make sure that no objects might block the signaling area.

To prevent water stains from damaging wood floors or carpets, it is

recommended to place the base station on tile or marble floors.

3. Place the Robot

Press and hold the button on the robot for 3 seconds to turn it on. Place

the robot onto the base station with the mop assembly facing toward the

washboard. Then you will hear a voice notification when the robot successfully

connects to the base station and starts charging.

Note: It is recommended to fully charge the robot before its first use. When

the robot cannot be turned on after the battery is depleted, manually connect

Mop Assembly

the robot with the station to charge it.

4. Add Water to the Clean Water Tank

Take out the clean water tank from the base station, and fill it with clean water

up to the max water line. Then install it back into the base station.

>1 m

＞5 cm

＞1,5 m

Note:

Do not fill the water tank with hot water as this may cause the water tank to warp.

Do not add any liquid other than the officially-approved cleaning solution to

help prevent base station malfunction.

MAX Water Line