DreamGEAR Shadow Wireless Manual rápido
Procurar online ou descarregar pdf Manual rápido para Controlador de videojogos DreamGEAR Shadow Wireless. DreamGEAR Shadow Wireless 3 páginas. For ps3
Imprimir páginaPACKAGE CONTENTS:
• Shadow Wireless Controller
• USB Receiver
• USB Charge Cable
• User's Guide/Warranty Card
• Registration Card
CHARGING SHADOW WIRELESS:
The Shadow Wireless controller features an internal rechargeable battery.
1. To charge the Shadow Wireless, use the included USB charge cable
or your original Sony USB charge cable.
2. Connect the mini USB cable to the mini USB port located on the top
of the Shadow Wireless controller.
3. Connect the standard USB plug to any available port on your
PlayStation 3 game console. Your PlayStation 3 must be powered
"ON" in order for the Shadow Wireless to charge. The DG/PS3 menu
button will flash to indicate charging has begun. When the controller
is fully charged the LED will become solid.
Note: You can also charge Shadow Wireless from any powered USB port.
SHADOW WIRELESS SET-UP:
1. Connect the included USB receiver to any available USB port on the
PlayStation 3 game console.
2. Press the connect button on the USB receiver. The receiver LED will
flash rapidly.
3. Press the DG/PS3 menu button. The LED on the receiver and
controller will become solid when the controller is properly synced to
the PlayStation 3.
CHARGING WHILE PLAYING:
The Shadow Wireless controller can be charged during game play.
1. To charge the Shadow Wireless during game play, both the USB
charge cable and USB receiver must both be connected to your
PlayStation 3 game console.
2. To play and charge your Shadow Wireless controller, please follow
the previous charge and set-up portion of this user's guide.
Notes:
• If the Shadow Wireless LED button flashes during connection the
internal battery is becoming low.
• If the Shadow Wireless Controller will not function properly during
proper set up or gameplay, press the reset button located on the
back of the controller.
FCC NOTE: This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try the interference by one of the
following measures.
• Reorient to locate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications made on the system not expressly approved by the
manufacturer could void the user's authority to operate equipment. This device
complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
FOR TECHNICAL SUPPORT PLEASE CONTACT:
1-877-999-DREAM