Carmanah E Series Manual de instalação - Página 11

Procurar online ou descarregar pdf Manual de instalação para Painel solar Carmanah E Series. Carmanah E Series 20 páginas. Rrfb mast arm kit
Também para Carmanah E Series: Manual de início rápido (20 páginas), Manual de instalação (16 páginas), Manual de substituição do sistema de gestão de energia (12 páginas), Manual do utilizador (18 páginas), Manual de substituição (9 páginas), Manual de instalação (18 páginas)

• Obtain 3" of red wire supplied with the kit and strip both ends to 0.35".

• Insert one end of 3" red wire into PBS+ terminal.

• Route modified AI harness wires (from Steps 2 – 5, violet, blue, black, red and yellow)

into the hole shown.

• Install the wires into the terminals as follows:

Violet →

3-position splice terminal with red wire going to PBS+

→

Blue

EXT1

→

Red

Middle BAT+

Black →

Middle BAT−

If the system has a push

button, insert the positive

push button wire into the

empty position of the 3-

position splice terminal.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com

Install AI Harness

Blue

(EXT1)

(PBS+)

Violet and

red (splice

terminal

• Align ends of heatshrink on both harnesses near end of

sheet metal tab.

• Cable tie around both harnesses and sheet metal tab.

APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE

Red

(BAT+)

E/F Series

Black

(BAT−)

Page 11