Formula Air AADA Series Manual de manutenção - Página 8
Procurar online ou descarregar pdf Manual de manutenção para Amortecedores de fogo e fumo Formula Air AADA Series. Formula Air AADA Series 17 páginas. Pneumatic sliding damper
Imprimir página
CAUTION !
The mounting of the sliding damper has to be performed by qualified personnel only. Before starting
assembling, check that you have all the parts and the correct tools for mounting.
CAUTION !
Make sure to wear the appropriate protective clothing, gloves, eye protection and masks when
needed.
3.2.
Mounting the cylinders on the body
3.2.1 For sliding dampers with ROUND cylinders
Step 1 :
Insert the head of the cylinder body through the hole in the top of the sliding damper body.
Step 2 :
Tighten the top of the cylinder with the big counter nut.
Step 3 :
Attach the base of the cylinder to the body using nuts, counter-nuts and spacers.
IMPORTANT :
Make sure that the cylinder is aligned with the body to ensure proper blade movement and
avoid premature wear of the components.
Step 4 :
Pull the sliding damper blade completely out (make sure that the hole in the middle of the blade is
aligned with the pipe pieces of the sliding damper body).
Step 5 :
Pull out the cylinder rod, pass it through the hole at the top of the sliding damper blade, and tighten
the two counter nuts using a bit of Loctite.
Maintenance manual | Electro-pneumatic sliding dampers
8
www.formula-air.com
Lock nut and
washers
Bolt
Nut
Spacer
Counter-nut