ATI Technologies AT4000 Manual do Proprietário - Página 11

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador ATI Technologies AT4000. ATI Technologies AT4000 13 páginas. 2 to 7-channel power amplifier

ATI Technologies AT4000 Manual do Proprietário

Power Amplifier Specifications

Series
Number of Channels
EIA 1kHz Output Power at 8 Ohms*
EIA 1kHz Output Power at 4 Ohms*
Input Sensitivity for Full Rated Power
Frequency Response at Rated Output
Phase Response
Signal-to-Noise Ratio "A-Weighted"
Total Harmonic Distortion (THD)
Intermodulation Distortion (IMD)
Load Impedance
Power Bandwidth FTC
Damping Factor
Crosstalk
Gain
Slew Rate
Input Impedance
Remote Trigger Voltage
DC Output Offset
Power Requirements
Chassis Dimensions (H x W x D) mm
Net Weight (lbs/kg) Model Dependent
*EIA 1kHz Power refers to maximum average power in watts at 1 kHz with 0.01% THD and noise.
**FTC Full Bandwidth Power refers to maximum average power in watts from 20Hz to 20 kHz with 0.05% THD and noise.
The contents of this manual are Copyright © 2015 by Amplifier Technologies, Inc. and may not be duplicated or reproduced by
ny means, whether physical, electronic or otherwise without prior written consent from Amplifier Technologies, Inc.
Specifications are those in effect at the time of printing. Amplifier Technologies, Inc. reserves the right to change
specifications or designs at any time without notice.
203 x 438 x 429 (Without feet: H = 178)
Handles protrude 1.8" (45.7mm); Add 1¼" (32 mm) for input/output jacks
Page 11
AT4000
2 to 7
250 Watts
375 Watts
200 Watts
300 Watts
1.95 Volts
51 to 93 / 23 to 43
62 to 105 / 28.2 to 47.7