ANDELI MCT Series Manual do Proprietário - Página 13

Procurar online ou descarregar pdf Manual do Proprietário para Sistema de soldadura ANDELI MCT Series. ANDELI MCT Series 20 páginas. Multifuction welding&cutting machine

Imprimir página

5.5.5 MMA welding Installation

By pressing function selection button on front panel

By rotating the knob to adjust welding current to start MMA welding.

By pressing setting button

Voltage Reduce Device,when turn it on,No-load voltage will drop to 15V.By pressing setting button (8),

to select and adjust Hot Start current/Hot Start time

start easier and with better welding result.

Note: For details,please refer to Page6, the "Panel description".

WARNING！

It is strictly forbidden to insert or remove any cable or connector in use during the

welding process. This operation will endanger personal safety and cause serious

damage to the equipment.

220V

(7),select to turn ON or OFF VRD function.The VRD function is the



Connect Electrode holder Quick

Connector to the positive (+) welding

output terminal



Connect Earth Lead Quick Connector to

the negative (-) output welding terminal

See picture below.



Connect to AC 220V input voltage,Turn

on the power switch to start

machine.

,to select MMA working mode.

and Arc force current,which make the arc to

the