Dreamland D3630 Manual de Instruções - Página 8
Procurar online ou descarregar pdf Manual de Instruções para Produtos de higiene pessoal Dreamland D3630. Dreamland D3630 12 páginas. Sleepwell heated duvet
Imprimir página
control (8) Diagram [C]. The setting (5) (Diagram C) will be illuminated in red on your LED Display (3)
(Diagram C). Your duvet will be lovely and warm in just 5 minutes.
EN
TO SET FOR ALL NIGHT USE: RELEASE the Ready for Bed fast pre-heat button, and press
temperature button (9) (Diagram [C]) to select your preferred all night temperature setting from 1-5. This
will be illuminated in orange on the (3) LED display (4) (Diagram C).
1 OR 9 HOURS AUTO SHUT OFF TIMER: The Intelliheat control has an AUTOMATIC SHUT OFF TIMER.
To set the timer, press the timer button (7) (Diagram [C]) and select either 1h or 9h. This will be illuminated
in green on the (3) LED Display (6) (Diagram [C]).
TIMER OFF/STANDBY: When the set time period has elapsed, the duvet will automatically switch off and
the standby light will be illuminated in blue on the (3) LED display (10) (Diagram [C]). If you wish to switch
your duvet back on again, press the timer button (7) (Diagram [C]) selecting either 1 or 9 hours.
MANUAL SWITCH OFF BOTH DUVET AND CONTROL: Switch off the back of your Intelliheat control
(11) (Diagram [C]) to off (O) position.
MEMORY FUNCTION: After using your duvet for more than 5 minutes, the Intelliheat control will remember
your last temperature setting.
DISCONNECT: To disconnect your heated duvet from the mains socket, switch the control to OFF position
on the back of your Intelliheat control (O) (11) (Diagram [C]), and then safely disconnect the plug from the
mains socket (Diagram [B]).
Your electric duvet is suitable for washing. Check the washing instructions on the label of your duvet
to wash it correctly.
WARNING! Always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
BEFORE WASHING OR STORING YOUR SLEEPWELL HEATED DUVET:
1.
Disconnect the control from the mains socket.
2.
Disconnect the connector (2) (Diagram [A]) from the duvet by pressing the push buttons at the sides of
the control connector (1).
3.
Ensure that the controls are not connected and none of the wires have worn through the fabric.
4.
It is important to measure the duvet before washing and check that the dimensions are approximately the
same before drying.
MACHINE WASHING
•
The duvet can be machine washed at 40°C on a wool programme.
•
Only the gentle spin cycle is to be used. DO NOT use an extra spin cycle.
TUMBLE DRYING
•
Tumble dry at a low temperature.
•
DO NOT use the duvet until it is completely dry.
HANGING THE DUVET OUTSIDE TO DRY
WARNING! Hang the appliance without using pegs on the
wired area of the duvet so as not to cause any damage to it.
•
The duvet must be stretched back to approximately its original size during the drying process. This
is best done whilst damp, working from side to side, stretching a piece at a time. This procedure may
need to be repeated a few times until fully dry.
6