Carmen C90007 Manual de instruções e de segurança - Página 6

Procurar online ou descarregar pdf Manual de instruções e de segurança para Produtos de higiene pessoal Carmen C90007. Carmen C90007 8 páginas. Universal toning belt
Também para Carmen C90007: Manual de instruções e de segurança (12 páginas)

USING YOUR APPLIANCE

The Universal Toning Belt is a high-performance
device that utilises palpitating movements in
order to tone different parts of the body. It mimics
conventional chiropractic treatment, thus not
only performing integrated toning, but may also
help to reduce stress levels and enhance general
well-being.
Tones and treats main muscle groups,
stimulating and massaging tissue to aid
Physio and help movement
Stimulates and massages deep tissue
which aids physiotherapy and improves
mobility.
Massage areas:
Abdomen
Lumbar (lower back)
Upper Back
Legs
Calves
Remote Control functions:
Mode Change: Pressing the Mode Button lets
you alternate between modes
Level Adjustment: Press the High or Low Button
to adjust the level.
Rotation Direction: Pressing the Direction Button
sets the motion in a clockwise or anti-clockwise
direction (only in Manual Mode)
Powering On/Off: Press the Power Button
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6060
6
OPERATION INSTRUCTIONS
1.
Wrap the belt tightly around the body, adjust
the size and fasten using the Velcro strap.
2.
Ensure the remote control is attached to
the belt.
3.
Attach the AC adaptor to the belt power
connection point.
4.
Plug the adaptor into the power outlet after
making sure that the power outlet voltage is
compatible with that of the adaptor. Once
connected a green light will show on the
remote control.
5.
Press the Power Button once to turn on.
The unit will now run in Auto Mode unless
the Mode Button is pressed to adjust it to
Manual.
Auto Mode
Press the mode button on the remote to
switch to automatic mode. The indicator
light will light green.
The belt will automatically run from level 2
and will complete a cycle.
The High and Low Buttons may be used to
adjust the starting level.
Minimum level = 1 / Maximum level = 5.
Manual Mode
Press the mode button again to switch to
manual mode. The indicator light will light
red.
The belt will start from the level it is set to
(e.g. level 3). Use the High and Low buttons
to adjust the level.
In manual mode the Direction button may
be used to alternate between clockwise and
anti-clockwise rotations.