Bosch Professional Pro Pruner Manual de instruções original - Página 7
Procurar online ou descarregar pdf Manual de instruções original para Ferramenta eléctrica Bosch Professional Pro Pruner. Bosch Professional Pro Pruner 25 páginas.
Imprimir página
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The tool is intended for professional use in pruning branches
and plants with a diameter up to 25 mm.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Cutting knife
(2)
Warning LED
(3)
Status LED
(4)
Socket for attaching the Bosch special protective
A)
gloves
(5)
Rechargeable battery
(6)
Battery release button
(7)
On/off switch
(8)
Battery charge indicator
(9)
Cutting switch
(10)
Blade
(11)
Handle (insulated gripping surface)
(12)
Blade lock nut
(13)
Screw for adjusting the distance between the cut-
ting knife and blade
(14)
Oil filler opening
A) The protective glove function is available for special designs.
The accessories illustrated or described are not included
as standard delivery. A complete overview of accessor-
ies can be found in our accessories program.
Technical Data
Battery-operated secateurs
Article number
Rated voltage
A)
Max. cutting performance
Weight according to EPTA-Pro-
B)
cedure 01:2014
Recommended ambient temper-
ature during charging
Permitted ambient temperature
C)
during operation
and during
storage
Bosch Power Tools
Battery-operated secateurs
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20−25 °C with rechargeable battery GBA 12V
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Removing the Battery (see figure A)
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
Do not continue to press the On/Off switch after the
u
power tool has automatically switched off. The battery
can be damaged.
To remove the battery (5), press both release buttons (6)
and pull the battery downwards out of the power tool. Do
not use force to do this.
Follow the instructions on correct disposal.
Battery Charge Indicator
LED
Continuous lighting 3 x green
Pro Pruner
Continuous lighting 2 x green
3 601 JK1 0..
Continuous lighting 1 x green
V
12
Flashing light 1 x green
mm
25
If no LED lights up after pressing the button (7), then the
kg
1.0
battery is defective and must be replaced.
°C
0 to +35
Status LED indicator
Status LED indicator
°C
–20 to +50
Indicator is flashing green
3.0Ah.
Meaning
Sleep mode
1 609 92A 5R5 | (10.07.2020)
English | 7
Pro Pruner
GBA 12V...
GAL 12...
GAX 18...
Capacity
≥ 66%
33–66%
≤ 33%
Reserve