Andersen 68/72 STE SE Manual - Página 2
Procurar online ou descarregar pdf Manual para Guinchos Andersen 68/72 STE SE. Andersen 68/72 STE SE 10 páginas. 2+1 speed; 12v & 24v
Imprimir páginaYou have purchased an ANDERSEN high quality winch. This product is a result of many years of
development and experience in producing winches for sailboats. This winch gives you a high degree of
functionality and many years of safe and easy sail handling.
PLEASE READ THIS BEFORE INSTALLING YOUR ANDERSEN ELECTRIC WINCH.
The electric ANDERSEN winch has some built-in advantages:
Easy to fit on your boat.
-
Template included.
-
-
Special tools included.
Electric unit is turnable in 8 horizontable steps (45°).
-
-
Easy to dismantle. Winch and electric unit can be dismantled separately.
Winch in the usual high ANDERSEN quality, featuring drum, roller bearings etc. of stainless
-
steel.
-
Always the possibility of manual (2 speed) drive, just by inserting a standard winch handle.
No shift-bottom of any kind.
-
MODULAR POWER SYSTEM©: Always the possibility of changing to a hydraulic drive unit
or from 2+1 SE to a 2+2 or the Compact© electric drive unit.
Mounting installation:
Follow mounting instructions on next page:
Ensure that each hole in the deck is bedded, including the big hole in the center.
IMPORTANT: Be careful not to put bedding compound IN the thread holes in the deck plate.
Ensure that the sealing ring (O-ring) on top of the gear unit is placed in its groove.
Electric Installation:
Follow mounting instructions on next page and Wire dimensions & fuse sizes on last page.
WARNING: Do not use smaller wire, than recommended in the diagram. This can cause malfunction of
the winch and in worst case; FIRE. The wires should always be as short as possible.
Normal Use:
The electric motor has built-in overload circuit breaker, which breaks the circuit, before the motor gets
too hot.
After a short period of cooling, depending on temperature under deck, ventilation etc., the winch will be
ready for electrical operation again.
Meanwhile, if necessary, just insert a standard winch handle, and use the winch as a 2 speed manual
winch. We recommend to remove the handle when operated electrically - from a safety point of view.
General Service Instructions:
The electric drive unit is lubricated & sealed and requires no further maintenance.
The part on deck is a standard self tailing winch, and needs regular service. We recommend
dismantling, cleaning and lubrication once a year. Under extensive use, such as racing, charter or blue
water sailing, we recommend to make a further lubrication check during the one year period.
We strongly recommend always to use ANDERSEN WINCH GREASE© when lubricating your winch.
ANDERSEN WINCH GREASE© is a high quality silicone/Teflon® grease.
www.Busse-Yachtshop.de - [email protected]
CONGRATULATIONS