COMMUNITAKE CTIP401 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Telefone COMMUNITAKE CTIP401. COMMUNITAKE CTIP401 11 páginas. 4g smart phone

11.

Fingerprint Key Sensor

12.

Memu

13.

Home

14.

Back

CHARGING THE BATTERY

Connect one end of the USB cable (supplied) to the USB port of the DC+5V adaptor (supplied).

Connect the other end of the USB cable to the USB port of the device. Plug the DC+5V adaptor

into the wall socket (AC 180-240V). Charging will start.

You can also charge the device via a USB cable connected to a computer. The device should only be

connected via a USB 2.0 connector.

You can charge the phone via USB cable connected to a computer as well.

NOTE

When the battery capacity is low, you will see the prompt "Battery is low". Please charge your device

immediately to ensure proper device use.

CAUTION

Do not throw the battery into the fire; otherwise it may cause fire breakout or explosion of the battery. Do

not place the battery together with metal necklaces or with other metal objects, otherwise it may cause

liquid leakage, overheat, fire breakout or explosion of the battery. Do not use or put the battery near the

fire, oven or other places with high temperature; otherwise it may cause liquid leakage, overheat, and fire

breakout or explosion of the battery. If you notice, when charging the battery or using the device, that the

temperature of the battery is abnormally high; the color of the battery casing has changed; the battery

casing is distorted or any other unusual phenomena, please stop using the device and replace the battery.

Do not charge the battery continuously for more than 24 hours.

Risk of explosion if battery is replaced by an incorrect type.

Dispose used batteries according to your local municipality instructions.