Community Compact 600 Manual de instalação e funcionamento - Página 12
Procurar online ou descarregar pdf Manual de instalação e funcionamento para Altifalantes Community Compact 600. Community Compact 600 17 páginas. I series
Também para Community Compact 600: Manual de instalação e operação (16 páginas)
Imprimir página
LOUDSPEAKER CABINET PAINTING PROCEDURE
I SERIES cabinets are available in standard colors of Black and White; custom
colors may be ordered as Configured-to-Order items. The cabinet finish is a
resilient water-based paint that makes an excellent substrate to accept most
types of paints, allowing custom colors to be applied in the field. If you are
considering painting the cabinet, we recommend ordering the White version
of the cabinet for the most predictable results when color-matching existing
colors. A Black or White replacement grille cloth kit should also be ordered. For
most custom colors, black grille cloth is recommended. The kit also includes
replacement soft plastic trim strip (to fit upper/lower edges of grille).
Follow grille removal instructions (Figure 6a) and reserve hardware for
reattachment.
Warning: The grille edges are sharp! Use care when handling the unprotected
edges of the grille to prevent injury.
CABINET
Mask off the input panel, woofer and horn (Figure 6b). Paint the cabinet and
allow the paint to fully cure.
Grille Retention Bar
5mm x 20mm
Socket Head
Screw
Figure 6a. Remove one retention bar, loosen that side
of the grille and then remove the other retention bar
GRILLE AND ALUMINUM RETENTION STRIPS
The grille and aluminum retention strips must be removed and
painted separately. To paint the grille, carefully remove the grille
cloth backing and the soft plastic strip protecting the top and
bottom edges (Figure 6c).
Use paint that is compatible with powder coating, and paint the
outside (front and sides) of the grille and allow the paint to fully
cure. Do not paint the cloth or rubber trim. Paint the front and
edges of the grille retainers with the same paint used on the grille.
Allow paint to fully cure before reassembling.
Page 12
Grille
Quick Start Guide
Front
Figure 6b. Mask off the internal
components and rear input panel.
Figure 6c. Remove trim
strips and grille cloth
I SERIES IP800/IP600, IS800/IS600
Rear