Community iBOX M12 Manual de operação e instalação - Página 10
Procurar online ou descarregar pdf Manual de operação e instalação para Altifalantes Community iBOX M12. Community iBOX M12 16 páginas. Professional stage monitor
Imprimir página
PERMANENT INSTALLATION
The install version of the M12 can be used anywhere a conventional 12-inch two-way loudspeaker would be
used. It can also be used in many applications where a conventional loudspeaker would not be appropriate,
such as overhead or under-balcony in a theater, conference rooms and distributed systems.
install version is provided with a mounting bracket plate and four M10 hanging points.
mounting bracket to the M12 using the four provided 40mm hex bolts, 10mm lock washers and 10mm flat
washers. The entire assembly can then be mounted to a flat surface. The OmniMount bolt pattern on the
back of the bracket is drilled out at the center of gravity for safe and secure mounting.
Note: (1) OmniMount 120 bolt pattern is located at the center of gravity.
No hardware is provided to attach the M12 and bracket assembly to the mounting surface. Such hardware
must be supplied by the installer and should be sized and rated for the weight load of the enclosure. The
installer is solely responsible for determining if all rigging components that are used to mount or suspend
the enclosure are adequately sized and rated, and if the structure they are mounted or suspended from is
capable of safely supporting the aggregate weight load. It is always the installer's responsibility to insure
that the combined weight load does not exceed the Working Load Limit of any one rigging fitting.
Figure 10: M12 wall/ceiling mounting plate
Figure 11: Wall mount assembly diagram
Community M12 – Installation / Operation Manual - Page 10
(4) M10 x 40mm HEX BOLT
(4) 10mm LOCK WASHER
(4) 10mm FLAT WASHER
The M12
Connect the