Community R.15COAX Manual de instalação e operação - Página 10
Procurar online ou descarregar pdf Manual de instalação e operação para Altifalantes Community R.15COAX. Community R.15COAX 13 páginas. R series
Também para Community R.15COAX: Manual de instalação e operação (17 páginas)
Imprimir página
ACCESSORIES
R-VTY15 VARY-TILT YOKE FOR R.15
R-VTY35 VARY-TILT YOKE FOR R.35
R-FRY35 FULL ROTATION YOKE FOR R.35
EC STATEMENT OF CONFORMITY
This document confirms that the range of products of Community Professional Loudspeakers bearing the CE label meets
all of the requirements in the EMC directive 89/336/EEC laid down by the Member States Council for adjustment of
legal requirements. Furthermore, the products comply with the rules and regulations referring to the electromagnetic
compatibility of devices from 30-August-1995.
The Community Professional Loudspeaker products bearing the CE label comply with the following harmonized or national
standards: DIN EN 55013:08-1991, DIN EN 55020:05-1995, and DIN EN 55082-1:03-1993.
The authorized declaration and compatibility certification resides with the manufacturer and can be viewed upon request.
The responsible manufacturer is the company:
Community Light & Sound
333 East Fifth Street, Chester, PA 19013 USA
Phone: (610) 876-3400 • Fax: (610) 874-0190
Page 10
Provides pan-tilt operation.
Zinc-rich epoxy dual-layer
powder-coated steel
with hardware, color-
matched to loudspeaker.
Provides pan-tilt operation.
Zinc-rich epoxy dual-layer
powder-coated steel
with hardware, color-
matched to loudspeaker.
Provides full rotation mounting
capability for down-firing
application (i.e. top of press
box). Zinc-rich epoxy dual-layer
powder-coated steel
with hardware, color-
matched to loudspeaker.
Installation and Operation Manual
MAINTAINING WEATHER RESISTANCE
GUIDELINES FOR R-SERIES OUTDOOR USE
R SERIES is suitable for outdoor installation when used as
recommended. For best results in outdoor applications, follow
these guidelines:
• Always orient the loudspeaker so the mouth of the horn is, at a
minimum, pointing at least 5 degrees downward. Failure to do
this could result in water collecting inside the enclosure under
extreme weather conditions.
• When handling an R SERIES loudspeaker, be careful not to
scratch or scrape the finish on the grille, yoke, or enclosure.
• All mounting holes must be sealed off with the stainless steel
bolts, washers, and rubber washers supplied. If, for any reason,
these bolts must be removed, seal off the hole with silicone
caulking or some other suitable weather-tight sealant.
• The rubber washers supplied with the mounting bolts must
always seat against the enclosure.
• The grille assembly is designed to prevent normal and wind-
driven rain from directly entering the mouth of the loudspeaker.
The grille is not designed to withstand such things as being
directly sprayed from a hose; therefore this should be avoided.
• If you use any hardware in place of hardware provided with
your R SERIES loudspeaker, it should also be made of stainless
steel.
R.15COAX, R.35COAX, R.35-3896