Bosch Nexxt Premium Gas Operating Manual de instruções de funcionamento, cuidados e instalação - Página 22
Procurar online ou descarregar pdf Manual de instruções de funcionamento, cuidados e instalação para Secador Bosch Nexxt Premium Gas Operating. Bosch Nexxt Premium Gas Operating 28 páginas. Dryer
Também para Bosch Nexxt Premium Gas Operating: Manual de instruções de funcionamento, cuidados e instalação (28 páginas)
Imprimir página
Operation
Using the dryer
1. Open the door.
2. Check lint filter.
The filter should be cleaned
after and before every drying
process. Cleaning the filter
reduces the drying time and
saves energy.
3. Rotate program selector to the
desired program.
Select the program which
corresponds to the laundry in
the dryer from the program
selection table (see page 21).
The dryer light turns on inside
the drum.
The estimated remaining time
i
will be indicated.
Lint filter indicator flashes for
i
5 seconds - Check lint filter"!
22
4. Select Additional Options" on
the display.
More detailed information on
the individual additional options
can be found on page 19.
5. If required, select Option" by
pressing the button.
The Options" are explained on
page 20.
The estimated remaining time
i
will be updated.
6. Place laundry in the empty
drum. Put each piece of laundry
into the machine separately.
For best results the laundry to
be dried must be sorted
according to type of laundry
and desired degree of drying.
For further information see
page 18.
Observe drying symbols of the
i
laundry manufacturer.
If drying woolen clothing and
shoes, see the information on
page 17 and page 23.
Ensure that there is only laundry in
the drum. Check that all items are
completely in the drum.
7. Close the door.
The Start/Stop" indicator light
starts flashing.
If you have chosen a time
i
program don't forget to select
a time. Otherwise the
Start/Stop" indicator light will
not flash and the dryer will not
start.
If the door has not been closed
i
properly, the dryer will not start.
8. Press the Start/Stop" button.
The Start/Stop" indicator light
illuminates.
The program starts with an
i
acoustic signal (if set).
If an automatic program has been
selected, the indicator lights
indicate the progress of the
program sequence.
At the end of the program
i
sequence damp dry an
acoustic signal is emitted
(if set).
At program end an acoustic
i
signal is emitted (if set) and the
LED wrinkle block/finished"
illuminates.
When the drying process is
i
complete (program or selected
time program ended), the drum
rotates at specific intervals.
This prevent the laundry from
creasing (see Extended
Wrinkle Block", page 20).