Bosch Programme Table Manual de instruções - Página 4

Imprimir página

Bosch Programme Table Manual de instruções

Before washing for the first time

Run a wash cycle without any laundry

Sort and load the laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, level of soiling and temperature.

Do not exceed the maximum load

Observe the important information

Close the washing machine door. Take care not to trap items of laundry between the washing

Add detergent and care product

The amount of laundry, level of soiling, water hardness (ask your water supply company) and

On models without an insert for liquid detergent:

Pour liquid detergent into the appropriate dispenser and place in the drum.

During operation, open the detergent drawer with care.

Dilute thick fabric softener and conditioner with water.

This prevents blockages.

Set** and adjust the programme

e selector

Start/

Reload

Press

= cold)

model-dependent) or

(Rinse hold

mains in the water after the final rinse,

ay panel).

ators:

mme duration or end (-

ne door, add laundry

page 4, 5

page 9

page 7.

page 9.

Insert items of laundry of varying sizes.

machine door and the rubber seal.

Measure according to:

manufacturer's instructions.

**If the

symbol is lit in the display

panel, the childlock is active

Deactivate it, page 5.

Additional functions and options buttons

Individual settings, page 5

Start/Reload

Programme selector for switching the

machine on and off and for selecting

the programme. Can be turned in

either direction.

All buttons are sensitive and need only

to be touched lightly. If you press and

hold the

(Finished in) option button,

the appliance automatically runs

through the settings options.

Washing

Detergent drawer

with compartments I, II,

Washing machine door

Control panel

Washing machine

door handle

Service flap

Washing

Switch off

Turn the programme selector to Off.

Turn off the tap

Not required for AquaStop models

Refer to Installation instructions.

Remove the laundry

Open the washing machine door and remove the laundry.

(Rinse hold = no final spin) is active: turn the programme selector

to Drain

or Spin . Select the spin speed if necessary.

Press

Start/Reload.

– Remove any foreign objects - risk of rusting.

– Leave the washing machine door and detergent drawer open

so that any residual water can dry away.

End of programme when ...

... the

Start/Reload button is off and -

display panel.

If the display panel lighting is off, press any button

Energy-saving mode, page 5.

Cancel the programme

Programmes at high temperatures:

– To cool the laundry: Select Rinse

– Press

Start/Reload.

Programmes at lower temperatures:

– Select Spin

or Drain

– Press

Start/Reload.

Change the programme if...

... you have selected the wrong programme by mistake:

– Reselect the preogramme.

– Press

Start/Reload. The new programme starts from the

beginning.

Add laundry when ...

...

Start/Reload is pressed and in the display panel both

symbols are then lit.

is lit, the washing machine door cannot be opened.

Select the

Start/Reload button.

- appears in the

page 5