Bosch Series 4 Manual de instruções - Página 9

Imprimir página

3Trouble shooting

M alfunctions often have simple explanations. Please

T r o u b l e s h o o t i n g

read the following notes before calling the after-sales

service.

Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Fault table

Problem

Possible cause

The appliance

The plug is not

does not work

plugged into the

mains

Power cut

The fuse is faulty

The lighting does

The LED lights

not work.

are defective.

--------

Solution

Connect the appliance to the

power supply

Check whether other kitchen

appliances are working

Check in the fuse box to make

sure that the fuse for the appli-

ance is in working order

You can read about this in the

section entitled "Replacing the

LED lights".

Replacing the LED lights

Warning – Risk of electric shock!

When changing the bulbs, the bulb socket contacts are

live. Before changing the bulb, unplug the appliance

from the mains or switch off the circuit breaker in the

fuse box.

Warning – Risk of injury!

The light emitted by LED lights is very dazzling, and can

damage the eyes (risk group 1). Do not look directly

into the switched on LED lights for longer than

100 seconds.

Important! Only use bulbs of the same type and

wattage.

Disconnect the appliance from the power supply.

Remove the metal grease filter.

Push the bulb out of the appliance from the rear.

Turn the bulb a quarter turn anti-clockwise and

remove it.

Replace the bulb with one of the same type.

Insert the metal grease filter.

Plug in the mains plug and switch the fuse back on.

Trouble shooting