Community R.5COAX66/66T Manual - Página 2
Procurar online ou descarregar pdf Manual para Sistema de altifalantes Community R.5COAX66/66T. Community R.5COAX66/66T 2 páginas.
Imprimir páginaINPUT CONNECTION GUIDE
Version
8 Ohm
"T" Version 70V
100V
SPECIFICATIONS
MODEL
R.5COAX66
Type
2-way, coaxial, full-range
loudspeaker system
Frequency
80 Hz – 18 kHz
Range
(90 Hz – 12.5 kHz ±3.5 dB)
Maximum Input
200W RMS, 500W Program
40 volts RMS, 89 volts
momentary peak
Recommended
420W - 600W @ 8 Ohms
Amplifier Power
Nominal
60° horizontal x 60° vertical
Dispersion
Nominal
8 Ohm (min 4.2 Ohms @ 9.9
Impedance
kHz)
Crossover
2 kHz
Frequency
Components
LF: 1 x 12" (305 mm) driver
HF: 1 x 1" (25 mm) exit, non-
metallic diaphragm, Ferrofluid
cooled compression driver
mounted on a 60° x 60° horn
Driver
Dyna-Tech
Protection
Recommended
60 Hz high pass filter
Signal
Processing
Input
Approx. 12 ft (4 m) SJOW #16
Connection
Gauge cable
(white = +, black = –)
Enclosure
Roto-molded gray polyethylene
Material
Grille
Weather resistant 3 layer
stainless steel
Mounting
Five 3/8-16 rigging points
Accessories
Stainless steel yoke bracket,
(Included)
multi-angle aiming strap
Dimensions
16 in. x 16 in. x 16 in.
(406 mm x 406 mm x 406 mm)
Weight
35 lbs. (15.9) kg
** Community strives to improve its products on a continual basis. Specifications may therefore be subject to change without notice.
DIMENSIONS
R.5COAX66, R.5COAX66T, R.5COAX99, R.5COAX99T
Black
White
Negative
Positive
Negative
N/A
Negative
N/A
R.5COAX66T
2-way, coaxial, full-range
loudspeaker system
80 Hz – 18 kHz
(90 Hz – 13 kHz ±3.5 dB)
200W, 100W, 50W, 25W taps
for 70V line
200W, 100W, 50W taps for
100V line
200W, 70V/100V line
transformer
60° horizontal x 60° vertical
70V --
200W: 25 Ohms, 100W: 50 Ohms
50W: 100 Ohms, 25W: 200 Ohms
100V --
200W (100W tap mark): 50 Ohms
100W (50W tap mark): 100 Ohms
50W (25W tap mark): 200 Ohms
2 kHz
LF: 1 x 12" (305 mm) driver
HF: 1 x 1" (25 mm) exit, non-
metallic diaphragm, Ferrofluid
cooled compression driver
mounted on a 60° x 60° horn
Dyna-Tech
80 Hz high pass filter
Approx. 12 ft (4 m) 5 conductor
18 AWG
Roto-molded gray polyethylene
Weather resistant 3 layer
stainless steel
Five 3/8-16 rigging points
Stainless steel yoke bracket,
multi-angle aiming strap
16 in. x 16 in. x 16 in.
(406 mm x 406 mm x 406 mm)
38.5 lbs (17.4 kg)
Brown
Orange
N/A
N/A
200W
100W
N/A
200W
R.5COAX99
2-way, coaxial, full-range
loudspeaker system
80 Hz – 18 kHz
(90 Hz – 12.5 kHz ±3.5 dB)
200W RMS, 500W Program
40 volts RMS, 89 volts
momentary peak
420W - 600W @ 8 Ohms
90° horizontal x 90° vertical
8 Ohm (min 3.8 Ohms @ 9.9
kHz)
2 kHz
LF: 1 x 12" (305 mm) driver
HF: 1 x 1" (25 mm) exit, non-
metallic diaphragm, Ferrofluid
cooled compression driver
mounted on a 90° x 90° horn
Dyna-Tech
60 Hz high pass filter
Approx. 12 ft (4 m) SJOW #16
Gauge cable
(white = +, black = –)
Roto-molded gray polyethylene
Weather resistant 3 layer
stainless steel
Five 3/8-16 rigging points
Stainless steel yoke bracket,
multi-angle aiming strap
16 in. x 16 in. x 16 in.
(406 mm x 406 mm x 406 mm)
35 lbs. (15.9) kg
R.5 YOKE MOUNTING BRACKET
Yellow
Red
N/A
N/A
50W
25W
100W
50W
R.5COAX99T
2-way, coaxial, full-range
loudspeaker system
80 Hz – 16 kHz
(90 Hz – 13 kHz ±3.5 dB)
200W, 100W, 50W, 25W taps
for 70V line
200W, 100W, 50W taps for
100V line
200W, 70V/100V line
transformer
90° horizontal x 90° vertical
70V --
200W: 25 Ohms, 100W: 50 Ohms
50W: 100 Ohms, 25W: 200 Ohms
100V --
200W (100W tap mark): 50 Ohms
100W (50W tap mark): 100 Ohms
50W (25W tap mark): 200 Ohms
2 kHz
LF: 1 x 12" (305 mm) driver
HF: 1 x 1" (25 mm) exit, non-
metallic diaphragm, Ferrofluid
cooled compression driver
mounted on a 90° x 90° horn
Dyna-Tech
80 Hz high pass filter
Approx. 12 ft (4 m) 5 conductor
18 AWG
Roto-molded gray polyethylene
Weather resistant 3 layer
stainless steel
Five 3/8-16 rigging points
Stainless steel yoke bracket,
multi-angle aiming strap
16 in. x 16 in. x 16 in.
(406 mm x 406 mm x 406 mm)
38.5 lbs (17.4 kg)