Carnival King 382CCM28 Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha Carnival King 382CCM28. Carnival King 382CCM28 6 páginas. Cotton candy machine
Também para Carnival King 382CCM28: Manual do utilizador (4 páginas), Manual do utilizador (3 páginas)
Imprimir página
Cotton Candy Machine
User Manual
General Safety Precautions
1.
This manual will outline safety warnings and precautions, operating, maintenance, and cleaning. The warnings and
instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Factors such as
caution and common sense cannot be built into this product and it is trusted the operator will follow these measures.
2.
This machine must never be modified and should only be used for its intended purpose.
3.
Always check that the cotton candy machine is plugged into a grounded outlet with the appropriate electrical supply.
Ensure that the wall outlet being used is properly grounded. If it is not, you must install a grounded outlet. Have the work
performed only by a certified electrician who is properly qualified to meet local safety and electrical codes.
4.
Before disconnecting from the power source, be sure that all switches have been turned OFF. To unplug the machine,
firmly grasp the plug, and remove from the outlet – never pull on the cord itself.
5.
Ensure that the power outlet, plug and cord being used are in good, working condition. Damaged components should
be repaired by a certified electrician who is qualified to meet local safety and electrical codes. Even with a properly
functioning power cord, keep water away from the cord and avoid letting your power cord run over carpets or heating
devices.
6.
If missing or broken components are found, leave the machine TURNED OFF. Do not attempt to use it. Contact a
qualified service technician to make all repairs.
7.
No one under 18 should operate this machine unsupervised.
8.
The head operates at high temperatures and high speed. To prevent burns and other severe injuries keep your hands
away from the spinning head. Keep loose clothing and other foreign objects (including the cone collecting the cotton
candy) away from the spinning head.
9.
Always use the machine in a clean and dry area.
Wear safety glass to prevent hard sugar crystals from harming your eyes.
10.
Assembly (382CCM21CT Only)
1.
Unpack box and remove all components from protective wrap.
2.
Use one of the longer bolts and matching washer (package A) provided to connect the long leg assembly (F) and the
2-pcs of the crossbar (E) together. Thread the 2 rests/pads into the bottom of the long leg assembly (F).
3.
Connect the completed above parts (Step 1) with the wheel frame (G) by using the bolts and washers in Package A.
4.
Insert wheel axis (H) into the wheel frame (G). Place washers from (package A) onto each side of the wheels (I) and
attach it with the round cap nuts with the wrench provided in (Package A). You may loosen/tighten the wheels to ensure
it rolls smoothly.
5.
Lay the main unit on its side for convenient assembly. BE CAREFUL NOT TO DAMAGE THE FLOSS HEAD. Attach both
the wheel frame (G) and long leg assembly (F) to the bottom of the main unit (J) using bolts and matching washers in
(Package A).
6.
Turn the completed unit back to its up-right position. Install the handrail (D) onto the working platform (C) and then
install the assembly on the left hand side of the main unit using bolts and washer from Package B. Then install the shelf
(B) on the right hand side using bolts and washers from Package B. Install the bowl on top of the base. Make sure the
bowl is not in contact with the heating head. Place floss bubble shield (optional) on top of the bowl.
7.
Install the bowl on top of the base. Make sure the bowl is not in contact with the heating head. Place floss bubble shield
(optional - sold separately) on top of the bowl.
Note:
Continue to pages 5-6 for additional assembly instructions and diagrams.
|
CarnivalKingSupplies.com
2