Caroma Invisi Series II Manual de instalação - Página 17
Procurar online ou descarregar pdf Manual de instalação para Produto de canalização Caroma Invisi Series II. Caroma Invisi Series II 20 páginas. Urinal concealed cistern
Também para Caroma Invisi Series II: Manual (16 páginas)
Imprimir página
1
1
- pre installation
2
Ball Valve
Inlet Valve
Flexible Hose
Disconnect Flexible Hose from the Inlet
Valve and the Ball Valve.
5
"click"
Inlet
Valve
Assembly
Lift tab and slide the Inlet Valve Bracket to
the left.
1
- with button panel
Dust Cover
Panel Assembly
3
"squeeze"
Remove the Bridge Assembly by squeezing
tabs front and back to disengage from
locking tabs inside the tank.
6
"click"
Rotate and remove the Inlet Valve
Removing Internal Components through Access Window
Full Flush
Face Plate
Bridge
Assembly
1
- with blanking panel
Panel Assembly
Face Plate
4
Outlet
Valve
Lift the Outlet Valve to disengage from
guide ribs in the base of the tank and lay
over on it's side.
7
Lift the Outlet Valve from the base of the
tank, roll forwards and rotate so the button
end comes out first.
NOTE: Reverse procedure to reassemble.
Blanking Panel