Andis Detachable Plus AG Utilização e cuidados

Procurar online ou descarregar pdf Utilização e cuidados para Máquina de cortar cabelo Andis Detachable Plus AG. Andis Detachable Plus AG 2 páginas. Andis model ag detachable blades are compatible with oster model a5
Também para Andis Detachable Plus AG: Manual do utilizador (2 páginas)

Imprimir página

Andis Detachable Plus AG Utilização e cuidados

changing the blade assembly

If your clipper blades no longer cut properly (be sure to try

more than one blade, since blade currently being used may

be dull), it could be that your blade drive assembly needs

replacement.

HINGE

SCREWS

To change the blade drive assembly:

Unplug your clipper.

Remove blade set.

Remove four housing

screws with philips

DIAGRAM H

screwdriver.

Turn clipper over and

remove cover.

Before attempting to

remove the blade drive

assembly, you must

remove the blade hinge

first. Remove the

two blade hinge screws

(Diagram H). When

removing the blade hinge,

DIAGRAM I

you will notice a small

spring set in between

the hinge and the lower

housing (Diagram I).

Make sure that this part

does not get lost when

replacing the blade drive

assembly.

Remove blade drive

mounting screws

(Diagram J).

NOTE: Before removing

DIAGRAM O

blade drive assembly,

note the way it is posi-

tioned (this will help you in

reassembly). Remove

blade drive assembly

(Diagram K).

Drive bearing should be at

its lowest position, if not,

move it with your finger

to lowest position

(Diagrams L and M).

Align screw holes of new

blade drive assembly and

press down level at the

HINGE

SCREWS

screw holes (Diagram N).

10. Reassemble blade drive

mounting screws

(Diagram J).

11. Be sure the hinge spring

DIAGRAM H

is in its place before

attempting to replace the

blade hinge and screws

(Diagram O). When replac-

ing the hinge screws,

place screw in the screw

hole and slowly turn

counter-clockwise until

you feel the screw drop

into place. This assures

SPRING

the screw is properly

aligned within the hole

threads. Turn screw clock-

DIAGRAM I

wise to tighten, just until

snug. dO nOt OVeR-

tighten.

12. Replace cover and turn

clipper over.

13. Replace housing screws

(Short screws in back by

cord—long screws in

front by blade).

DIAGRAM O

factORy RepaiR seRVice

When the blades of your Andis Clipper become dull after

repeated use, it is advised to send your blades to an Andis

Authorized Service Station mentioned below for resharpen-

ing. If you wish your clipper to be serviced as well, they

should be carefully packed and mailed either Parcel Post

Insured, or U.P.S.

to find an authorized service station near you log on

to www.andis.com or contact our customer service

department: 1-800-558-9441 (U.s.)

1-800-335-4092 (canada)

SPRING

LIMITED WARRANTY

This Andis product is warranted against defective material or

workmanship for one year from the date of purchase. All implied

warranties arising and by virtue of State law shall also be limited

to one year. Any Andis product determined to be defective in

material or workmanship during the warranty period will be

repaired or replaced without cost to the consumer for parts and

labor. The defective product must be returned with proof of

purchase and $6.50 to cover cost of handling, to any Authorized

Andis Repair Station or to: Andis, 1800 Renaissance Blvd., P.O.

Box 085005, Racine WI 53408-5005 USA or IN CANADA to:

A & AG AGENCIES (CANADA), INC. 10050 Côte de Liesse,

Lachine, Québec, H8T 1A3 CANADA. Enclose or attach a letter

describing the nature of the problem. Due to foreign matter

sometimes found in hair, clipper blades or resharpening of

blades are not subject to the one year warranty. The blade set

has a 10 Day Limited Warranty. If the blade set fails to cut, it will

be resharpened free of charge if returned within 10 days of

purchase. Send your blade set postage prepaid with the original

purchase receipt to: ANDIS COMPANY, ATTENTION: Service

Department, 1800 Renaissance Blvd, Sturtevant, Wisconsin

53177 (U.S. & Canada only). Andis will not be liable under this

warranty for any defect, failure or malfunction of any of its

products caused by normal wear, abuse, misuse, unauthorized

adjustments or disassembling. Andis will not be liable for any

consequential damages resulting from any defect in material or

workmanship of any of its products. Some States do not allow

limitations on how long an implied warranty lasts or exclusion

or limitation of incidental or consequential damages, so the

above limitations or exclusions may not apply to you. The

Warranty gives you specific legal rights, and you may also have

other rights which may vary from State to State.

Date Purchased ––––––––––––––––––– Model ––––––––––––

keep this fOR yOUR RecORds

Form # 27074 Rev. P

Detachable Plus

Andis Model AG

Detachable Blades

are compatible with

Oster Model A5

Congratulations –

you just went First Class when you bought

this Andis Clipper. Careful workmanship and

quality design have been the hallmarks of

Andis products since 1922.

Printed in U.S.A.

MODEL AG

Clipper