Comnet CNGE11FX3TX8MSPOE Manual de início rápido - Página 9

Procurar online ou descarregar pdf Manual de início rápido para Router de rede Comnet CNGE11FX3TX8MSPOE. Comnet CNGE11FX3TX8MSPOE 12 páginas. Environmentally hardened managed ethernet switch 3 sfp + 8 electrical ports with optional 30 or 60 watt poe

Comnet CNGE11FX3TX8MSPOE Manual de início rápido
QUICK START GUIDE

Power Supply

For CNGE11FX3TX8MS Models, Power Supply must be 12 to 57 VDC @ 15 W max.
For CNGE11FX3TX8MSPOE Model, Power Supply must be 44 to 57 VDC @ 255W max.
For CNGE11FX3TX8MSPOEHO Model, Power Supply must be 44 to 57 VDC @ 375W max.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater than room ambient. Therefore,
consideration should be given to installing the equipment in an environment compatible with
the maximum ambient temperature (T
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air
flow required for safe operation of the equipment is not compromised.

Front Panel LEDs

LED
Color
Alarm
Red
Power 1 Alarm
Green
Red
Power 2 Alarm
Green
Red
PoE (Power over Ethernet)
30W A
Green
30W B
Green
Gigabit Ethernet ports
Link
Green
Activity
Amber
Gigabit SFP ports
Link/Activity
Amber

POEHO 60 W PoE Model

Port 1 to 4 support both mode A and mode B PoE which is 60 W in total. When a greater than 30
W PoE supported device is connected to ports 1 to 4, both 30 W A and B Indicator LEDs will be
turned on to indicate the high-power application device is connected.
TECH SUPPORT: 1.888.678.9427
) specified by the manufacturer.
ma
Status
Description
On
Alarm Fault Status has been triggered
On
Power Input on VIN1 terminal block Input
On
Power lost to VIN1 terminal block
On
Power Input on VIN1 terminal block Input
On
Power lost to VIN2 terminal block
On
MODE A PoE is being supplied on indicated RJ-45 port
On
MODE B PoE is being supplied on indicated RJ-45 port
On
Port in Full Duplex mode
Blinking
Data transmitted
Blinking
Data transmitted
CNGE11FX3TX8MS[POE][HO]
QSG_CNGE11FX3TX8MS[POE][HO]_REV– Rev. 11.6.17 PAGE 9