Comnet CNGE3FE8MSPOEHO Manual de início rápido - Página 4
Procurar online ou descarregar pdf Manual de início rápido para Interruptor Comnet CNGE3FE8MSPOEHO. Comnet CNGE3FE8MSPOEHO 12 páginas. Environmentally hardened managed ethernet switch 3 ge sfp + 8 fe electrical ports with optional 30 or 60 watt poe
Também para Comnet CNGE3FE8MSPOEHO: Manual de início rápido (10 páginas)
Imprimir página
QUICK START GUIDE
Safety Information
» Only ComNet service personnel can service the equipment. Please contact ComNet Technical
Support.
» The equipment should be installed in locations with controlled access, or other means of
security, and controlled by persons of authority. When operating at temperatures above 51º C, the
equipment surfaces will be hot to the touch. Installation in restricted access location is required
for this case.
» For POE models requiring a power supply not labeled LPS, the unit should be installed in a
restricted access location using a 60950-1, 2nd Edition + Am. 1 + Am. 2 Certified power supply
rated for the ambient temperature in which it is installed. Total derated power rating should be
greater than the sum of the attached loads plus 15 W for the switch.
» Use CDRH compliant SFP modules when using fiber connectivity with this device.
» When used in Australia or New Zealand, the product is certified for intra building applications
only, and should not be directly connected to network cables with outside plant routing.
TECH SUPPORT: 1.888.678.9427
CNGE3FE8MS[POE][HO]
QSG_CNGE3FE8MS[POE][HO]_REV– Rev. 11.7.17 PAGE 4