Ativa DQ121MDE Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Triturador de papel Ativa DQ121MDE. Ativa DQ121MDE 5 páginas. Product manual

Imprimir página

How to Maintain your Shredder

Use Shredder Lubricant Regularly

• Only use lubricants specifically designed for your shredder, such as shredder lubricant,

shredder lubricant sheets or shredder lubrication pouches.

• NEVER use spray lubricants.

• Follow directions on the shredder lubricant, shredder lubricant sheets or shredder

lubrication pouches.

• Do not touch the cutting surface.

• Continue to recycle waste paper in a normal manner.

When Using Shredder Lubricant Sheets or Pouch

Never tear or open a shredder lubricant sheet. Please, empty waste basket prior to use. Shred one

shredder lubricant sheet by feeding sheet in the direction on the arrows, directly into the paper

feed entrance as per the instructions that came with your shredder. After shredding the lubricant

sheet run the shredder in reverse for 10 seconds for optimal performance. Align the first lubricant

sheet to the left of the shredder throat. The next time you use a shredder lubricant sheet align the

pouch to the right of the shredder throat. Continue to alternate between aligning the pouches to

the left and right to ensure the entire cutting mechanism remains well lubricated. Re-lubricate

your shredder by shredding a lubrication sheet after 30 minutes of shredding, or, a minimum of

twice per month to maintain maximum performance.

When Using Bottled Shredder Lubricant

Apply shredder lubricant directly into the paper feed entrance (Figure 2) and shred paper or

apply a stripe of lubricant across a sheet of paper (Figure 3), then shred the paper as per the

instructions that came with your shredder. After applying lubricant and shredding paper, run

the shredder in reverse for 10 seconds for optimal performance. Reapply lubricant after

30 minutes of shredding or a minimum of twice per month to maintain maximum performance.

Store in a cool dry place. Recycle empty bottle whenever possible or dispose of it in normal trash.

Figure 1

Figure 2

Illustration is for reference only.

Figure 3

How to Maintain your Shredder

Clearing a Jam

If paper is not inserted properly into the shredder, or if the sheet capacity is exceeded, a jam may

result. The shredder will automatically stop until the jam is cleared. Move the switch to the REVERSE

(REV) position, and remove the excess paper from the top and pull it out.

TO PREVENT ANY INJURIES, DO NOT PLACE YOUR HANDS NEAR THE FEED OPENING.

Once the paper is cleared, normal shredding operation can resume. If the shredder jams while in

reverse, press the switch to the FWD position and let shredder run to clear the jammed paper. If jam

does not clear, slide the switch back and forth between the REV and FWD until the jam is cleared. If

the jam cannot be cleared following this procedure, unplug the unit and carefully remove the

jammed paper manually.

Staples and Paperclips

Shredders are designed primarily to shred paper and single credit cards or CDs (as indicated).

Although our shredders are safe to shred the occasional standard staple, you should remove them if

possible. Also, industrial or non-standard, large size staples must be removed. Paperclips should not be

shredded at any time, as they significantly reduce the life of the shredder. Please remove staples and

paperclips from paper before shredding.