Bosch GBH 2-23 RE Professional Manual de instruções original - Página 10
Procurar online ou descarregar pdf Manual de instruções original para Perfurar Bosch GBH 2-23 RE Professional. Bosch GBH 2-23 RE Professional 45 páginas. Bosch gbh 2-23 re professional rotary hammer operating instructions
Também para Bosch GBH 2-23 RE Professional: Manual de Instruções (11 páginas), Manual de instruções original (45 páginas)
Imprimir página
10 | 中文
– Insert the universal holder into the tool holder while turn-
ing it until it locks automatically.
– Check that it is locked by pulling the universal holder.
– Insert a screwdriver bit in the universal holder. Only use
screwdriver bits that fit the screw head.
– To remove the universal holder, slide the locking sleeve
(3) backwards and remove the universal holder (22)
from the tool holder.
Maintenance and Service
Maintenance and Cleaning
Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
Replace a damaged dust protection cap immediately.
u
It is recommended that you have use an after-sales
service for this.
– Clean the tool holder (1) after each use.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: [email protected]
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
1 609 92A 8AC | (31.03.2023)
Do not dispose of power tools along with
household waste.
中文
安全规章
电动工具通用安全警告
阅读所有警告和所有说明! 不遵
警告！
照以下警告和说明会导致电
击、着火和／或严重伤害。
保存所有警告和说明书以备查阅。
在所有下列的警告中术语"电动工具"指市电驱动（有
线）电动工具或电池驱动（无线）电动工具。
工作场地的安全
保持工作场地清洁和明亮。混乱和黑暗的场地会
u
引发事故。
不要在易爆环境，如有易燃液体、气体或粉尘的
u
环境下操作电动工具。电动工具产生的火花会点
燃粉尘或气体。
让儿童和旁观者离开后操作电动工具。注意力不
u
集中会使操作者失去对工具的控制。
电气安全
电动工具插头必须与插座相配。绝不能以任何方
u
式改装插头。需接地的电动工具不能使用任何转
换插头。未经改装的插头和相配的插座将减少电
击危险。
避免人体接触接地表面，如管道、散热片和冰
u
箱。如果你身体接地会增加电击危险。
不得将电动工具暴露在雨中或潮湿环境中。水进
u
入电动工具将增加电击危险。
不得滥用电线。绝不能用电线搬运、拉动电动工
u
具或拔出其插头。使电线远离热源、油、锐边或
运动部件。受损或缠绕的软线会增加电击危险。
当在户外使用电动工具时，使用适合户外使用的
u
外接软线。适合户外使用的软线将减少电击危
险。
如果在潮湿环境下操作电动工具是不可避免的，
u
应使用剩余电流动作保护器（RCD）。使用RCD
可减小电击危险。
人身安全
保持警觉，当操作电动工具时关注所从事的操作
u
并保持清醒。当你感到疲倦，或在有药物、酒精
或治疗反应时，不要操作电动工具。在操作电动
工具时瞬间的疏忽会导致严重人身伤害。
使用个人防护装置。始终佩戴护目镜。安全装
u
置，诸如适当条件下使用防尘面具、防滑安全
鞋、安全帽、听力防护等装置能减少人身伤害。
Bosch Power Tools