ATL Berkshire SD 30 Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Telefone ATL Berkshire SD 30. ATL Berkshire SD 30 4 páginas.
Imprimir páginaMAKING CALLS
Press the HS button to turn the headset on and
dial as normal. When you have finished the call,
press HS to turn the headset off.
ADJUSTING THE VOLUME
You can adjust the volume of the earphones, by
rotating the dial on the right hand side of the
telephone.
TRANSFERRING CALLS
• FROM
HANDSET
If you have taken a call on the handset and
wish to transfer it to your headset, press HS
and keep it pressed while you replace the
handset.
• FROM
HEADSET
If you wish to transfer a call from your
headset to the handset, simply pick up the
handset. This action will switch off the
headset.
4. Features and Facilities
RECALL
Berkshire SD 30 telephones are provided with a
Recall or R button, required by modern public
exchanges in order to provide access to various
features such as transfering a call. For this, the
dialling selector switch (see diagram) in the base
of the telephone must be set to the MFT or MFE
positionper system requirements.
LAST NUMBER REDIAL (LR) KEY
If you wish to redial the last number you dialled,
you can do so by lifting the handset, and
pressing the LR button.
If you have a company exchange that requires a
pause after the outside line access code, Last
Number Redial will not be available on your
system.
SECRECY
The microphone in the handset / headset can be
turned off (mute) in order for you to refer to a
colleague without your caller hearing you.
TO
HEADSET
TO
HANDSET
•
Pressing the S button turns off the
microphone and flashes the adjacent
lamp.
•
Pressing the S button again turns the
microphone back on and the lamp is
turned off.
5. Help
If the telephone appears to be faulty when first
connected, a few simple checks may help to
identify some possible problems, as listed
below:
NO DIAL TONE
• Check that the telephone plug is fully inserted
in the socket
• If it is, try connecting the telephone into
another socket, if available.
If dial tone is now heard, the original socket is
faulty.
•
Alternatively,
telephone into your socket. If this telephone
gives dial tone, then your new telephone is
probably faulty.
ALL OPERATIONS SEEM SATISFACTORY
EXCEPT THE R BUTTON
• Change dialling selector switch from MFE to
MFT. If operation of R button is now
satisfactory, the problem is resolved.
If not, ask your supplier for assistance.
ALL OPERATIONS SEEM SATISFACTORY BUT
CALLS ARE NOT BEING RECEIVED
• Check that the Tone Caller Volume control is
not set to the OFF position.
If it is not set off and calls are not being
received, your Berkshire SD 30 supplier should
be contacted.
try
connecting
another