ATL Berkshire 600 AG Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Telefone IP ATL Berkshire 600 AG. ATL Berkshire 600 AG 13 páginas.

Imprimir página
Preparing to use
your Berkshire 600
AG
INITIAL CHECK
Our telephones are checked, tested and
leave us in perfect condition. If yours is
damaged, please return it to your supplier
with proof of purchase, for a replacement.
TELEpHONE NUMBER LABEL
The
telephone
underneath the handset for recording
frequently used telephone numbers. To
remove the plastic cover, operate the release
clip with your thumb nail and hinge upward.
CONNECTION
The Berkshire 600 AG telephone can be
connected either to a Direct Exchange Line,
or as an extension to a compatible company
exchange (pABX).
HANDSET CORD
This cord will require connection between
the telephone and handset. Take any end
of the handset cord, and locate the port
marked 'HANDSET' on the left hand side of
the Berkshire 600 AG, and simply push to
locate. Connect the other end to the base of
the handset to complete.
LINECORDS
The Berkshire 600 AG arrives with two
line cords for customer selection. Select
your required linecord (standard BS6312
BT-socket, or RJ45 socket for category 5
installations). The rear of the telephone has
a port marked 'LINE', plug your selected
linecord into this port first, and the other end
incorporates
a
to your telephone line termination point. An
RJ11 line cord is available as an option, ask
your supplier for details.
pLUG TOp pOWER SUppLY
A plug Top power Supply is provided to
power the ATL Berkshire 600 AG.
WARNING – Without the Plug Top
Power Supply fitted the ATL Berkshire
600 AG will automatically disable the
Bluetooth
no Handsfree operation and the LCD will
not be available in all circumstances.
label
If the telephone has been in operation
without the Plug Top Power Supply when
the power is reconnected the Bluetooth
functionality will be deactivated, details
on how to reactivate the Bluetooth
feature can be found in a later section
of this User Guide under the heading,
Activating or deactivating the Bluetooth
feature.
WALL MOUNTING KIT
A wall mounting kit is available as an option,
please contact your supplier for further
information.
Using your
Berkshire 600 AG
with the Handset

RECEIvING CALLS

Incoming calls will be announced by the
audible ringer and flashing LED. To answer
the call, simply lift the handset. This will
start the Call Timer, please refer to the LCD
section of this guide for more detail on how
to configure the viewing angle etc.
Functionality, there will be
®
®
®
®