Electrolux EGM 626 Folheto de instruções - Página 10

Procurar online ou descarregar pdf Folheto de instruções para Hob Electrolux EGM 626. Electrolux EGM 626 11 páginas. Gas hobs

Building In

Mod. EGM 626

Dimensions are given in millimeters

= Auxiliary burner

= Semirapid burner

= Rapid Burner

= Electric plate

These hobs can be inserted in a built-in kitchen unit

whose depth is between 550 and 600 mm. The hobs

dimensions are shown in the relevant diagram.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 100 mm.

The hobs can be installed in a kitchen unit with an

opening for insertion whose dimensions are shown in

Fig. 9.

Fitting the hob to the worktop

Before fitting the hob into the cut out, an adhesive seal

must be fitted to the underside outside edge of the hob.

It is essential that no gaps are left in this seal in order to

prevent spillage near the hob seeping into the cabinet

below.

1) Remove the pan supports, the burners caps and

crowns and turn the hob upside down, taking care the

ignition candles are not damaged in this operation.

2) Place the sealing gasket all around the glass top

edge as shown in Fig. 10.

3) Fit the hob in the cut out and push it down until the

glass top and the working top come in touch, as shown

in Fig. 11.

Mod. EGM 636

Fig. 9

FO 2098

Fig. 10

A) guarnição

Fig. 11

a) Sealing gasket

FO 2108