Bosch GBM 10 Manual de instruções original - Página 6
Procurar online ou descarregar pdf Manual de instruções original para Perfurar Bosch GBM 10. Bosch GBM 10 33 páginas.
Também para Bosch GBM 10: Manual de Instruções (12 páginas)
Imprimir página
OBJ_BUCH-718-004.book Page 6 Wednesday, April 27, 2011 10:11 AM
6 | English
Safety Warnings for Drills
Hold the tool by the insulated gripping surfaces when
performing operations where the application tool or
the screw could contact hidden wiring or its own power
cord. Contact with a "live" wire will also make exposed
metal parts of the power tool "live" and shock the operator.
Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Technical Data
Rotary drill
Article number
Rated power input
Output power
No-load speed
Rated speed
Rated torque
Spindle collar dia.
Speed control
Right/left rotation
Key type drill chuck
Keyless drill chuck
Max. drilling dia.
– Steel
– Wood
– Aluminium
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
2 609 140 657 | (27.4.11)
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic. Machines with electronic control and right and
left rotation are also suitable for screwdriving and tapping.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck*
2 Front sleeve
3 Rear sleeve
4 Belt clip
5 Handle (insulated gripping surface)
6 Lock-on button for On/Off switch
7 On/Off switch
8 Rotational direction switch (GBM 10 RE)
9 Chuck key*
10 Key type drill chuck*
11 Screwdriver bit*
12 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GBM 10
GBM 10 RE
Professional
Professional
3 601 D73 0..
3 601 D73 5..
W
450
W
236
-1
min
2600
-1
min
1760
Nm
14
mm
43
–
–
–
mm
10
mm
25
mm
10
GBM 10 RE
Professional
3 601 D73 6..
450
450
236
236
0 – 2600
0 – 2600
0 – 1760
0 – 1760
14
14
43
43
–
–
10
10
25
25
10
10
Bosch Power Tools