Andon Health iHealth Track Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Monitor de tensão arterial Andon Health iHealth Track. Andon Health iHealth Track 16 páginas. Fully automatic ihealth track connected arm blood pressure monitor

Imprimir página

b. Sit with your feet flat on the floor without crossing your legs. While seated, place your palm upside in

front of you on a flat surface such as a table.Lying Down During Measurement：（You can also lie on your

back and place your left arm straight along your side with your hand palm-side up.） Position the air tube

in the middle of your arm in line with your middle finger.

1/2"(1-2 cm)

c. Close the cuff with the Velcro fastener.

d. The cuff should fit comfortably around your arm. You should be able to insert one finger between your

arm and the cuff.

Note: If the cuff becomes dirty, remove it from the monitor and wipe it with a lightly moistened soft

cloth. Then air-dry the cuff. Do not machine wash.Cleaning the cuff after every 200 measurements is

recommended.

3. CONNECTING THE CUFF TO THE DEVICE

Once you have determined that the cuff fits your arm (22 – 42cm), simply insert the cuff connector into the

socket on the side of the monitor. Ensure that the connector is completely inserted to avoid air leakage.