Andonstar 249 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Microscópio Andonstar 249. Andonstar 249 14 páginas.
Também para Andonstar 249: Manual do utilizador (14 páginas)

Imprimir página

Bracket instructions

①Arm locker

②Monitor Fixing Screws

③USB spot lights

④Stage height controller

⑤Mechanical stage

Quick Start

1. Connect the device to power supply as followed pic 4 to power on the microscope.

2. Press and hold the Power button (pic 2 #①) until the monitor lights up. (device may switch on

automatically when you power it on, and its totally normal)

*Trouble shooting

When the monitor image stops or froze, please pin the Reset hole (pic 2 #⑩) to reset the device first,

then power on the device again. (Reset hole is very tiny, located at the back of the monitor. You may

need to use the help of other tools with this process. All settings of the microscope will be back to

factory setting after this, but it won't delete any files saved in memory card).

（P3 Bracket instructions）

⑥Clips

⑦Loophole

⑧Bottom light

⑨light interface