dreo DR-KAF001 Manual do utilizador - Página 12
Procurar online ou descarregar pdf Manual do utilizador para Fritadeira dreo DR-KAF001. dreo DR-KAF001 13 páginas. Smart control air fryer
Imprimir página
Troubleshooting
Problem
Possible Solution
Make sure the air fryer is plugged in.
The air fryer will not turn on.
Push the basket securely into the air fryer.
The basket is overfilled. Divide the food into smaller
batches.
Foods are not completely
cooked.
Increase cooking temperature or time.
Ingredients that are stacked on top of each other or
Foods are cooked unevenly.
close to each other need to be shaken during cooking.
The non-stick plate should be placed in the basket.
Foods are not crispy after
Spraying or brushing a small amount of oil on foods
air frying.
can increase crispiness (see page 14).
Temperature won't go any
Each cooking function and preset menu have their
higher.
max temperature. Please refer to page 11-12.
The air fryer may produce some white smoke when you
use it for the first time. This is normal.
Make sure the basket and the non-stick plate is
White smoke is coming out
cleaned properly and not greasy.
of the air fryer.
Frying greasy foods will cause oil to leak into the basket.
This oil will produce white smoke. This is normal and
should not affect cooking.
17
Troubleshooting
Troubleshooting
Problem
Possible Solution
Dark smoke is coming out
Immediately unplug your air fryer. Food is burning. Wait
of the air fryer.
for smoke to clear before pulling the basket out.
Remove the basket from the unit to pause the cooking
How do I pause or stop the
and place it back to resume, OR press
cooking?
to pause.
Is the basket safe to put on
Use caution when handling, and place on heat-safe
my countertop?
surfaces only.
The display shows error
There is an open circuit in the temperature sensor.
code "E1".
Contact Customer Support.
The display shows error
There is a short circuit in the temperature sensor.
code "E2".
Contact Customer Support.
The display shows error
Overheat protection has been triggered. Please let it
code "E3".
cool down before turning it on again.
If your problem is not listed or still persists, contact our Customer Support at
START/PAUSE
18
Troubleshooting