Electrolux ICON E36GC75DSS1 Manual de utilização e cuidados - Página 18
Procurar online ou descarregar pdf Manual de utilização e cuidados para Hob Electrolux ICON E36GC75DSS1. Electrolux ICON E36GC75DSS1 20 páginas. 30" electric rangetop
Também para Electrolux ICON E36GC75DSS1: Especificação (1 páginas), Manual de instruções de instalação (8 páginas)
Imprimir página
Solutions to Common Problems
Surface Control knob has not been completely turned to LITE. Push in and turn the
Surface Control knob to LITE until burner ignites and then turn control knob to desired
flame size.
Be sure gas supply valve is open
Burner ports are clogged Clean burners See Cleaning the Burner Grates, Burner
Caps,Burner
Heads in General Care & Cleaning section With the burner off, clean
ports with a small-gauge wire or needle.
Power cord is disconnected from outlet (Electric Ignition Models only). Be sure cord is
securely plugged into the outlet.
Electrical power outage (electric ignition models only) Burners can be lit manually
See Setting Surface Controls in this Use and Care Guide
.....
,I
iI '
''
IIIIIIIIIIIIIIIIIIIIII
• Burner ports are clogged. With the burner off, clean ports by using a small-gauge wire
or needle
•
Moisture is present after cleaning. Lightly fan the flame and allow burner to operate
until flame is full. Dry the burners thoroughly following instructions in the General
Cleaning section.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Dust particles in main line. Allow the burner to operate a few minutes until flame turns
blue.
In coastal areas, a slightly orange flame is unavoidable due to salt air.