Atlantic Olympe Ventilo Manual do utilizador e de instalação - Página 9

Procurar online ou descarregar pdf Manual do utilizador e de instalação para Aquecedor Atlantic Olympe Ventilo. Atlantic Olympe Ventilo 14 páginas. Programmable electronic towel-drying

Imprimir página

Note: The pins supplied with the device are of the standard type. In case of a particular stand, use appropriate pins.

3) Connecting the device

- The device must be supplied with 230V, 50Hz.

- Mains connection must be ensured using a 3-wire cable

(Brown=Phase, Blue=Neutral, Black=Pilot wire), through

a connecting box. In damp premises, such as bathrooms

and kitchens, install the connecting box at least 25cm

from the ground.

- The installation must be equipped with a shutting-off devi-

ce in all poles having a distance of opening of contact of

at least 3mm.

- Ground connection is forbidden.

Do not connect the pilot wire (black) to ground.

- If power cable is damaged or too short, to avoid any danger it must be replaced by a qualified electrician

using special tools.

- If a device pilots or is piloted by a 30mA differential (e.g. bathroom), the pilot wire supply must be pro-

tected on this differential.

4) Fitting and removing the brackets

Panel heater cable

Pilot wire=Black

1st case: only one heater

2nd case: multiple heaters

Phase=brown

PHASE

NEUTRAL

Neutral=blue

Two possible cases

The pilot wire end is insulated

and not further connected

The pilot wire of all heaters in a

control group, up to a maximum

of 20 units with any one them used

as the Master, are connected

by a 1.0mm2 220-240V insulated cable

Electricity

grid