Electrolux 42 Manual do proprietário e instruções de instalação - Página 27
Procurar online ou descarregar pdf Manual do proprietário e instruções de instalação para Campânula de ventilação Electrolux 42. Electrolux 42 45 páginas. 30” and 36” free-standing range hood
Também para Electrolux 42: Manual de instalação, utilização e cuidados (22 páginas)
Imprimir página
SIDE PANELS
Side panels (not
supplied) must be
used whenever
the sides of the
refrigerator will be
exposed. The 1/4"
side panels will slip
into the side case
trim. Order side
panels from your
cabinet manufacturer.
*Depending on
installation height.
FLOORING
For proper installation, this refrigerator must
be placed on a level surface of hard material
that is at the same height as the rest of the
flooring. This surface should be strong
enough to support a fully loaded refrigerator,
or approximately 1500 lb.
NOTE: Protect the finish of the flooring. Cut a
large section of the cardboard carton and place
under the refrigerator where you are working.
Installation Instructions
24"
*84"
*3" to 4"
1-1/2"
27
GROUNDING THE REFRIGERATOR
IMPORTANT—Please read carefully
FOR PERSONAL SAFETY, THIS APPLIANCE
MUST BE PROPERLY GROUNDED.
The power supply cord of this appliance is
equipped with a three-prong (grounding)
plug which mates with a standard three-
prong (grounding) wall receptacle to
minimize the possibility of electric shock
hazard from this appliance.
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
Where a standard 2-prong wall outlet
is encountered, it is your personal
responsibility and obligation to have it
replaced with a properly grounded 3-prong
wall outlet.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG
FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO
CONNECT THE REFRIGERATOR TO A
2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD
WITH THIS APPLIANCE.