Electrolux CH120 Livro de instruções - Página 14

Procurar online ou descarregar pdf Livro de instruções para Campânula de ventilação Electrolux CH120. Electrolux CH120 21 páginas. Chimney hood
Também para Electrolux CH120: Livro de instruções (20 páginas)

Imprimir página

Venting

The hood is more effective when used in the

extraction mode (ducted to the outside).

Venting kits may be purchased through your

retailer or DIY store, and must be ducted to an

outside vent of 125mm (5").

The 120÷125mm collar should be fitted onto the

ducting spigot to suit UK diameter ducting, and

held in position by a jubilee clip (not supplied)

used to secure the flexible hose.

Where flexible duting is fitted the length should be

no more than:

3 metres with one 90º bend, or

2metres with two 90º bends.

Bends of more than 90º will reduce the efficency

of the hood and reduce airflow.

The ducting used must be manufactured

from fire retardent material conforming to

the relevant British Standard or DIN 4102-

B1.

When the cooker hood is ducted to the outside the

charcoal filters must be removed.

Recirculation

If you are using the hood for recirculation, ensure

the charcoal filters are in position following the

instructions contained in the section "To Remove/

Replace the Charcoal Filters".

Note: When the hood is used in the

recirculation mode ensure that the

plate (T) has been fixed into the lower

chimney section. If not, fit the plate as

illustrated opposite using two of the

self tapping screws provided in the

fixing kit.