Atlantic PV1700 Manual de instruções - Página 7
Procurar online ou descarregar pdf Manual de instruções para Equipamento para relva e jardim Atlantic PV1700. Atlantic PV1700 16 páginas. Oasis series skimmer, filterfalls, pump vault, fastfalls
Também para Atlantic PV1700: Manual do produto (12 páginas)
Imprimir páginaWhen you are finished, remove the spring clips and pull the liner away from the face
of the skimmer. Apply a consistent bead of Atlantic fish-safe silicone to the face of the
Skimmer along the centerline of the pre-drilled bolt holes. Once you are finished, you can
return the liner to its original position and replace the spring clips.
Figure 6.
ATTACHING THE WEIR DOOR
Unlatch the weir door and lower the door to its fully
open position. Insert the weir door assembly into the
Skimmer opening. With one hand push the bottom
of the weir door frame tight against the Skimmer
face. With the other hand gently push down on the
weir door latch until it clears the top of the opening.
Once it does, push the weir door assembly into the
Skimmer opening until the frame rests against the
face of the enclosure (Figure 7).
Line up the holes of the weir door frame with the
holes in the Skimmer face. Use a nail or awl to help
line up the holes and pierce the liner in the top
corners. Loosely fasten the top corners using two
of the supplied 1/4-20 machine screws and serrated
flange nuts. Next, install two screws in the bottom
corners of the weir door frame (Figure 8).
Once you have the weir door tacked at the corners
you can install the rest of the screws. Do not fully
tighten any screws until all of the screws have been
installed.
Use your fingers to hold the flange nut and a hand held screwdriver to tighten
the screws. The serrations on the flange nut will grab the plastic enclosure once it
makes contact, eliminating the need to use a wrench. Use caution when tightening
the screws. The screws need only be snug for the silicone to make a seal.
Figure 7.
Figure 8.
7