Drew Technologies CarDAQ-Plus Manual de início rápido - Página 4
Procurar online ou descarregar pdf Manual de início rápido para Equipamento de diagnóstico Drew Technologies CarDAQ-Plus. Drew Technologies CarDAQ-Plus 16 páginas.
Imprimir página
Introduction
Thank you for choosing CarDAQ-Plus! You now have the most complete
J2534 Pass-Thru device available for technicians today. The CarDAQ-
Plus will allow you to re-flash modern vehicle controllers to stock as
well as perform dealer level diagnostics on select manufacturer's
vehicles.
This Quick Start Guide covers the initial setup, features, and common
questions. This manual is always available at www.drewtech.com.
Information for individual manufacturers can be found in the J2534
Toolbox application.
Getting to Know CarDAQ-Plus
Your package includes: the CarDAQ-Plus interface, a crossover Ethernet
cable, a USB cable, an OBD-II cable, and a installation CD that includes
PC drivers and the J2534 Toolbox.
Powering CarDAQ-Plus
The CarDAQ-Plus receives power from a vehicle OBDII port. When CarDAQ-Plus
is powered-on, the lights will cycle through a self-test procedure. The CarDAQ-
Plus does not receive power from your PC's Ethernet or USB ports. Do not
connect the CarDAQ-Plus to your PC until you have installed the software below.
Setting up the CarDAQ-Plus
Do not connect the CarDAQ-Plus to your PC until you have
installed the software below.
Installing the CarDAQ-Plus Software to your PC
1.
Insert the CD that came with your CarDAQ-Plus into the CD/DVD slot of
your PC. Make sure your CarDAQ-Plus is not connected to the PC at this
point. The Autoplay options will appear:
2. Click on [Run setup.exe] to begin the installation.
4