Electrolux Icon E36DD75ESS Manual de instruções de instalação - Página 13

Procurar online ou descarregar pdf Manual de instruções de instalação para Campânula de ventilação Electrolux Icon E36DD75ESS. Electrolux Icon E36DD75ESS 33 páginas. External blower assembly for electrolux retractable ventilation systems
Também para Electrolux Icon E36DD75ESS: Manual de instruções de instalação (14 páginas), Ficha de especificações (1 páginas), Manual de utilização e cuidados (12 páginas), Catálogo de peças de fábrica (6 páginas), Manual de utilização e cuidados (12 páginas), Especificações e dimensões (2 páginas), Manual de instruções de instalação (14 páginas)

WARNING

•

To reduce the risk of personal injury caused by reaching over a hot appliance,

cabinet storage space located directly above the cooktop should be avoided.

•

Do not store combustible materials or items adversely affected by heat in cabinet

areas above the appliance.

•

Follow the instructions regarding minimum safe clearances and installation

location. Failure to do so may result in a fire or safety hazard.

Plan the installation so that all required minimum clearances between the cooktop,

overhead cabinets and adjacent vertical walls are provided. Refer to the cooktop

installation instructions for the minimum dimensions specific to the particular

appliance being installed.

The raised vent system is designed to remove the contaminants and by-products

that result when cooking with gas or electric appliances. The vent system consists

of the vent intake along with a remote blower. The raised vent downdraft systems

are compatible for use with select cooktops, therefore, these instructions offer

specific guidelines for mounting the raised vents behind the cooktops.

IMPOR

IMPORT T T T T ANT

ANT

IMPOR

ANT

Verify that the raised vent and blower being installed are a matched pair before

beginning the installation. (Part number 5304444802 and E30DD75ESS, E36DD75ESS,

E46DD75ESS, and E48DD75ESS.)

For installation of the raised vent system, provide an opening in the countertop as

shown in the Countertop Preparation section. Position the cutout so all required

minimum clearances are met. Make certain that the minimum flat countertop area

meets or exceeds the combined overall width and overall depth, as shown in

Figures 2, 3 and 4 that follow.