Atlantic Technology 272 PBM THX Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Subwoofer Atlantic Technology 272 PBM THX. Atlantic Technology 272 PBM THX 13 páginas. Thx select certified high performance powered subwoofer
Imprimir página
Model 272 PBM THX
Using the Low level Thruput
If desired, you can run a low level stereo signal through the 272 PBM THX and out to another unit.
This way you can add an additional subwoofer with minimal additional wiring. The signal that comes
out of the Thruput jacks is identical to the input signal.
High Level Connection
Alternately, you may use the high level (speaker) inputs. We recommend that you connect your new
272 PBM THX Powered Subwoofer(s) using high quality wire of 16 gauge or larger. There are many
respected manufacturers in the audio industry that specialize in speaker wire and interconnect cables
suitable for your new system. Please consult your audio/video specialist for more specific information.
High level Thruput
If desired, you can run a high level stereo signal through the 272 PBM THX and out to another unit.
This way you can add an additional subwoofer with minimal additional wiring. The signal that comes
out of the Thruput jacks is identical to the input signal.
You can connect to the High level inputs by using a variety of connectors, or by removing 1/2" of
insulation from each wire end, twisting the strands of wire together, placing the wire through one of
the post holes and screwing down the nut tightly. It's important to observe polarity while making
Figure 2:
Gold plated 5-way
binding posts.
Accepts up to 10
gauge bare wire.
Power Connection
Connect the power cord to an AC outlet only after making all other connections to the subwoofer.
This will avoid any chance of accidentally activating the subwoofer while wiring. Atlantic Technology
does not recommend plugging the subwoofer into the switched outlet of an amplifier, preamplifier,
or receiver. The power demands of the subwoofer amplifier may exceed the power rating of the
switched outlet and may damage the equipment.
The 272 PBM THX is totally automatic in its operation. The automatic on/off circuitry will only
activate the subwoofer in the presence of an audio signal from your system. After 7-10 minutes with
no signal detected from the rest of the system, the amplifier will shut itself off and go back into
standby mode. When the sub is in operating mode, the power LED located under the front grille will
glow green. The LED will glow yellow in the Standby mode and power consumption in this mode is
negligible. Standby operation can be completely bypassed by placing the Auto/Standby/Bypass switch
on the 272 PBM THX amplifier to the Bypass position.
Placement and Operation
Generally speaking, the best location for your new subwoofer is the front of the room, in or close to a
corner (Figure 3). Every room has its own unique sound characteristics, and flexibility in the exact
placement of the subwoofer is always desirable. The closer the subwoofer is placed to a wall and
especially a corner, the more and deeper the bass response you will hear. However, in some rooms,
corner placement can produce a "one note" boomy effect. Under such circumstances the subwoofer
may work better away from the corner. Experiment to find the best position in your room.
speaker connections: red (+) terminals on the amplifier to red (+) on the
speaker, black (-) on the amplifier to black (-) on the speaker. Look carefully
at the wires you are using and note that one of the wires in each pair will be
marked by either the conductor color, printing on the wire jacket, a ridge on
one side of the wire jacket, or a thread intertwined with the wire strands. By
convention, the marked wire is connected to the red (+) terminal.
8
Atlantic Technology
®