Electrolux ICON RH36PC60GS Manual de instalação, utilização e cuidados - Página 11

Procurar online ou descarregar pdf Manual de instalação, utilização e cuidados para Campânula de ventilação Electrolux ICON RH36PC60GS. Electrolux ICON RH36PC60GS 19 páginas. Range hood
Também para Electrolux ICON RH36PC60GS: Catálogo de peças de fábrica (4 páginas), Especificações do produto (2 páginas), Catálogo de peças (4 páginas)

Electrolux ICON RH36PC60GS Manual de instalação, utilização e cuidados

Ceiling ducting

Ceiling ducting
Ceiling ducting
Ceiling ducting
Ceiling ducting
• Use the template previously installed to prepare a
8-½" hole in the ceiling for ductwork.
8 1/2"
8.43" - 10"
minimum ceiling
7.93" - 10"
minimum ceiling

Making the electrical connections

Electrical Shock Hazard
Warning: Turn off power at the service panel before
wiring this unit.
120 VAC, 15 or 20 Amp cir
120 V
120 V
120 V
120 V
AC, 15 or 20 Amp cir
AC, 15 or 20 Amp cir
AC, 15 or 20 Amp cir
AC, 15 or 20 Amp circuit r
ELECTRICAL GROUNDING INSTRUCTIONS
ELECTRICAL GROUNDING INSTRUCTIONS
ELECTRICAL GROUNDING INSTRUCTIONS
ELECTRICAL GROUNDING INSTRUCTIONS
ELECTRICAL GROUNDING INSTRUCTIONS
THIS APPLIANCE IS FITTED WITH AN ELECTRICAL
JUNCTION BOX WITH 3 WIRES, ONE OF WHICH
(GREEN/YELLOW) SERVES TO GROUND THE
APPLIANCE. TO PROTECT YOU AGAINST
ELECTRIC SHOCK, THE GREEN AND YELLOW
WIRE MUST BE CONNECTED TO THE
GROUNDING WIRE IN YOUR
HOME ELECTRICAL SYSTEM, AND IT MUST
UNDER NO CIRCUMSTANCES BE CUT OR REMO-
VED.
4 12/16" (At least)
23 12/16"
30" Gas Cooktop (min)
24" - 30" Electric Cooktop (min)
cuit requir
cuit r
cuit r
cuit r
equired.
equir
equir
equir
ed.
ed.
ed.
ed.
Installing the hood
Failure to do so can r
Failur
Failur
e to do so can r
e to do so can r
e to do so can result in death or electrical
esult in death or electrical
esult in death or electrical
esult in death or electrical
Failur
Failur
e to do so can r
esult in death or electrical
shock.
shock.
shock.
shock.
shock.
• Remove junction box cover and knockout on the
top left side.
• If not already done, install 1/2" conduit connector
in j-box.
House
wiring
U.L. listed
nut
• Run black (live), white (neutral), and green (earth)
wires (#14 AWG) according to the National
Electrical Code or CSA Standards and local
codes and ordinances in 1/2" conduit from power
supply to j-box.
• Connect black, white, and green wires from
power supply to black, white, and green/yellow
wires in j-box respectively.
• These connections should be done always
making reference to the electrical diagram found
inside the hood.
• Close j-box cover and reapply screws.
Knockout
Junction box
cover
Metal electrical
conduit
11
11
11
11
11