Atlantic Technology System 6200 Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Subwoofer Atlantic Technology System 6200. Atlantic Technology System 6200 20 páginas. Pedestal subwoofer systems
Também para Atlantic Technology System 6200: Manual de instruções (12 páginas)

Atlantic Technology System 6200 Manual de instruções
6

Amplifier Back Panel

Amplifier Back Panel
Amplifier Back Panel
Figure 7
1
�� �� � � �� � �� �� � �� �� � � ����������
� � � � � � � � �
� � �
� � � � � �
����� � ������ ������
���������� ��� ��������� �������� ����
�������� ��� ���������� �� ����
������������ �� ������
NOTE: Items in gray area are found on SA-8200 amplifier only
Product Serial Number
1
Write this number in the space provided on page 2 for future ref-
erence.
2
Direct Access Remote Control port
Use for hard-wired direct access of remote control functions.
Remote Control jacks
3
The IR IN jack accepts an IR signal from a separately pow-
ered system (other than the Atlantic Technology PedWoof-
ers) or an IR signal generated by a "whole-house" controller.
Use the THRU jack to "daisy-chain" other devices to the sensor.
(page 8)
4
EXT IR Receiver Connector
Use the EXT IR RCVR input powered port to connect to the Ped-
Woofer's built-in IR receiver when the amplifier is not in line-of-
sight with the remote control.Use the OUT TO SLAVE jack to pass
on the received signal to other equipment.
2
3
4
�������� ����������
� � � � � � � � �
� � �
� � � � � �
����� � ������ ������
��� �� ����
���������� ��� ��������� �������� ����
��� ��
�����
�����
�������� ��� ���������� �� ����
������������ �� ������
�������
����
����
�� ��
�� ��
�����
�������
��
��
������
��������� �
8
9
5
6
��� �� ����
��� ��
�����
�������
����
����
�� ��
�����
��������� �
����
�� ��
��
��
�� ��
����
����� ������ �� ���� ���������� � �� ��� ������
10
5
Low Level jacks
Use the LO IN jack to connect to the subwoofer or LFE line out
10
from your processor/receiver. Use the THRU jack to pass the sig-
nal to the other channel of the amplifier or to another device.
(page 7)
6
High Level Inputs (SA-8200 only)
Use the HI IN binding posts to connect a high level (speaker) out-
9
put from your processor/amplifier.(page 7)
Speaker Outputs
7
Use the SPEAKER OUTPUT binding posts to connect the ampli-
8
fier to the PedWoofer.(page 7)
AC Input
11
Use the included power cord to connect your amplifier to a wall
outlet.(page 12)
8200/6200 Pedestal Subwoofer System
7
SA-6200 only
��������� �
�������
�������
�� ��
������ �
������ �
�������
������
�������
���� �� �������� �����
�� ��� ����
��
��
���
�� �����
��� ���
�� � �� ��
����� ���
11